News:

Please note that the Forums will be in Maintenance Mode, i.e. not accessible, this coming Wednesday, May 15th, This is to make backups and carry out the changes to make the forums only allow posting by CLC members. The start of the transition is planned for around 9 a.m. EDT, and is expected to last between four and eight hours.

Main Menu

1959-60 heater duct/boot

Started by Steve, January 13, 2005, 02:36:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Steve

January 13, 2005, 02:36:25 PM
Hello All,
Anybody out there know of a supplier for the rubber boot/duct that goes from the heater blower to the heater box on the firewall for non-air cars? Im looking for something close to the original, not a hard plastic one.
Thanks to all that reply, Steve

Bob

#1
January 13, 2005, 06:15:15 PM
USA Auto parts

Bruce Reynolds # 18992

#2
January 13, 2005, 08:10:19 PM
Gday Steve,

What I used on mine is a cut up inner tube and wrapped that around.   Put the overlapping join to the back after you have joined it with some contact cement.

Worked a treat.

And, if the inner tube has a couple of mends in it, all the better.   Hate cutting up a new tube.   Plus, you are left with pieces of rubber that can be used elswear in the workshop.

Bruce,
The Tassie Devil(le),
60 CDV
Print
Go Up Pages1
User actions