News:

Reminder to CLC members, please make sure that your CLC number is stored in the relevant field in your forum profile. This is important for the upcoming change to the Forums access, More information can be found at the top of the General Discussion forum. To view or edit your profile details, click on your username, at the top of any forum page. Your username only appears when you are signed in.

Main Menu

wirering 1956 cadillac conv

Started by lishka, February 17, 2018, 04:09:43 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

lishka

does anybody know off hand were the yellow wire on the driver side under the hood on top off the fender with the loop terminal go

Jeff Rosansky CLC #28373

In the 55 it comes from the starter to the coil resistor on the firewall. It gives a full 12 volts while starting. If that is it then it would be hot when the starter is engaged.
Jeff
Jeff Rosansky
CLC #28373
1970 Coupe DeVille (Big Red)
1955 Series 62 (Baby Blue)
Dad's new 1979 Coupe DeVille

lishka

its on the drivers side over the fender I know the wire you are referring to

J. Gomez

Quote from: lishka on February 18, 2018, 10:30:30 AM
its on the drivers side over the fender I know the wire you are referring to

Hmm, well there is/should be no “yellow” wire on that side ??? from the original standard hardness, unless someone splice one of these with the yellow.

The hardness on top of the inner fender (left driver side) would have the headlight, directional/parking and fog light (individual violet wire), plus the one for the blower motor which is close to the firewall.

Now if your car came with the Autronic-eye option there would be a “yellow” wire from the headlight foot switch terminal “1” to the power relay “B” (battery) terminal.

Does your car have the Autronic-eye option?
J. Gomez
CLC #23082

lishka


lishka

thank you  yes it does  were is the power relay

J. Gomez

Quote from: lishka on February 18, 2018, 10:07:52 PM
thank you  yes it does  were is the power relay

The power relay should be mounted on the inner fender well (left driver side) close to the Autronic amplifier.

Attaching a picture of the components the power relay is the silver case on the bottom, the amplifier is the large black box on top of the picture. You can see from the picture the power relay wires also go to the amplifier while the foot switch wires will end at the power relay.

Good luck..!
J. Gomez
CLC #23082

lishka