Print Page - FRONT TURN SIGNAL

Title: FRONT TURN SIGNAL
Post by: Chasmann on November 17, 2011, 11:51:15 AM

I AM IN THE PROCESS OF DISMANTLING MY GRILL AND SOME OTHER CHROME PIECES. I WOULD LIKE TO KNOW HOW THE PLUG DISCONNECTS FROM THE REAR OF THE HOUSING OF THE FRONT TURN SIGNALS.I WOULD APPRECIATE ANY ADVICE.THANKS CHARLIE 1949 SERIES 62

Title: Re: FRONT TURN SIGNAL
Post by: Dave Shepherd on November 17, 2011, 01:47:47 PM

Hmm, and the car is?

Title: Re: FRONT TURN SIGNAL
Post by: Roger Zimmermann on November 19, 2011, 06:47:22 AM

If I understand well, Charlie has a 1949 Serie 62.

Title: Re: FRONT TURN SIGNAL
Post by: Chasmann on November 19, 2011, 08:12:54 AM

THANKS ROGER.I FIGURED IT OUT. CHARLIE

Title: Re: FRONT TURN SIGNAL
Post by: 49 Convertible on November 19, 2011, 12:58:40 PM

As I remember it the wires stay in the housing and continue up to the fender blocks on each side where there is a block with screws in it mounted to the fender paneland you loosen the screws and draw the wires back thru the fender to the housing and remove the housing with wires still attached

Herman

Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Technical / Authenticity => Topic started by: Chasmann on November 17, 2011, 11:51:15 AM