Any specific directions for me to grease the cable, advice on pulling cable. Any suggestions would be appreciated.Thank you.
Doug 16070
Quote from: Doug 16070 on October 13, 2007, 04:20:38 PM
Any specific directions for me to grease the cable, advice on pulling cable. Any suggestions would be appreciated.Thank you.
Doug 16070
quote
10-14-07
DOUG, I tried to send a reply last evening, but the "spell-Check" function eraced the reply eace time I clicked OK at the end of spell-check.
You will need to remove the cable from the speedometer and using a rag, remove the old lube as you remove the cable. Having all of the old lube in a rag, beats having it on the seats or floor. I would use "White-Lube but, run that by the nearest GM parts department.
HTH Good Luck,JIM
Jim,
Thanks for the response. I plan on using the Lithium grease(white).
Doug
10-16-07
Doug,To continue with my suggession, to remove all of the old lube, Tape a "pipe-cleaner" to the transmission ends of the speedometer cable and insert the pipe cleaner/cable into the speedometer end and push it thru the outer jacket, have a rag on the garage-floor to catch the old grease. You may have to use several pipe cleaners to get it real clean. HTH
Good Luck,JIM
Jim,
I got the speedometer fixed. I disconnected the instrument panel end , cleaned it , sprayed with silicone & greased it it with white lithium. It works just fine now. Thanks for your replies, I appreciate it.Speedometer needle is smooth & quiet.Have a great day, & thanks again.
Doug 16070