News:

Reminder to CLC members, please make sure that your CLC number is stored in the relevant field in your forum profile. This is important for the upcoming change to the Forums access, More information can be found at the top of the General Discussion forum. To view or edit your profile details, click on your username, at the top of any forum page. Your username only appears when you are signed in.

Main Menu

HEATER HOOKUP

Started by grandads59, June 25, 2015, 09:01:14 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

grandads59

June 25, 2015, 09:01:14 PM
On my 59 coupe there are two sliding handles on the heater display (on dash)  Where do these two cables terminate on. The heater box.  Couldn't find any information in the shop manual.

Jon Hartwell

59-in-pieces

#1
June 26, 2015, 08:47:40 PM
Jon,
Can't remember if your car is NON-AC, but assumed so - controls in dash - pic.
Here are some other pics.

The "WARMER" lever-slide is for adjusting the heater valve on the heater core. - pic.
Note the hex screw with screwdriver blade slot, and the knurled clamp it tightens around the cable from the lever-slide.

The "DEFROSTER" lever-slide is for positioning the door-shutter inside the plenum-heater box - see stud on whih looped end of cable attaches plus inside toothed spring washer - for the flow of hot air up through the defroster outlets in the dash next to the inside of the windshield, with the assistance of (in conjunction with) the vacuum actuator - pic.

Hope these help.
Have fun,
Steve B.
S. Butcher

grandads59

#2
June 27, 2015, 09:24:15 AM
Hey s.
there is no AC will check it out this AM. and see how mine compares to your pics.

Many thanks

Jon
Print
Go Up Pages1
User actions