News:

Reminder to CLC members, please make sure that your CLC number is stored in the relevant field in your forum profile. This is important for the upcoming change to the Forums access, More information can be found at the top of the General Discussion forum. To view or edit your profile details, click on your username, at the top of any forum page. Your username only appears when you are signed in.

Main Menu

47 front seat back cushion removal

Started by bobrich47, April 05, 2021, 10:40:05 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

bobrich47

April 05, 2021, 10:40:05 PM
I put up a post on 4/1, about removing the front seat back cushion in my 47 60S. I'm unable to simply lift it up & out as easily as the rear one did. The Fisher body manual that I have says to bend the tabs down at the bottom of the cushion, but I don't see or feel any when I reach up under it. I've tried to attack it from the back,  but I can't get the back panel off because I can't get the robe cord end brackets off. I removed a Phillips head screw from the underside, but that didn't help.There is a bolt or screw holding it on, probably accessable under the cord?  There are some photos on my earlier post.  I don't know how I can continue.  I am trying to be as careful as possible removing these interior fabric pieces for patterns.  Thanks, Bob.
Bob Richards

Decoda

#1
April 12, 2021, 05:42:16 PM
On my 47 I pulled out the front seat bottom cushion then it was very easy to pull up the back cushion releasing it from the hooks. Here is a picture.

I hope this helps. Let me know if you need anything else.

Robert
Print
Go Up Pages1
User actions