News:

Reminder to CLC members, please make sure that your CLC number is stored in the relevant field in your forum profile. This is important for the upcoming change to the Forums access, More information can be found at the top of the General Discussion forum. To view or edit your profile details, click on your username, at the top of any forum page. Your username only appears when you are signed in.

Main Menu

Info: Inner Front Axle Seals-37 Fltwd

Started by Joseph P. McCormick, CXLC 14142, April 13, 2005, 09:31:32 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Joseph P. McCormick, CXLC 14142

April 13, 2005, 09:31:32 PM
Hello, I need to replace the inner front axle seals, left and right wheels, on a 37 Caddy Fleetwood 75 series.  The old ones appear to be felt, but old, hard and leaking.  NAPA said that they do not have a listing for this part. I think the seals come in contact with the outer part of the inner wheel bearing which has the following part number of it: 909528.  Any help on where I could obtain these seals would be greatly appreciated.  Joe

Harry Scott (4195)

#1
April 14, 2005, 10:54:49 AM
I replaced the seals on my 37 with the modern type, but cant find the number. If you give the old seal number and the measuremnts to Motion Industries, they are nationwide, (our local office # is 703-719-6803) they can match them up. Also, Olcar Bearings (advertises in Hemmings) probably has them. Good Luck

Joseph P. McCormick, CLC14142

#2
April 14, 2005, 04:24:00 PM
Hello Harry Scott,
Thank you for your respond.  I emailed the Olson Gasket Company to see if they could supply the parts.  I was impressed with their website, as they offered felt gaskets.  Thanks again.  Joe
Print
Go Up Pages1
User actions