News:

Please note that, while reinstating users, I have noticed that a significant majority have not yet entered a Security (Secret) Question & Answer in their forum profile. This is necessary for a self-service (quick) password reset, if needed in the future. Please add the Q&A in your profile as soon as possible

Main Menu

Blinkers not working

Started by Bizzteacher, November 14, 2023, 06:43:53 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Bizzteacher

1955 cadillac Coupe DeVille Can anyone point me in the right direction with my turn signals and brake lights? The brake lights stopped working all together and the blinkers only stay solid but don't blink. I tried changing the flasher but that didn't help. Also when the car is on both internal blinkers lights on the dash stay lit. Also one of the parking lights in the front stays on sometimes after I shut the car off and I have to disconnect the battery when parked so it doesn't drain the battery.

Cadillac Jack 82

Tim

CLC Member #30850

1959 Cadillac CDV "Shelley"
1964 Cadillac SDV "Rosalie"
1966 Oldsmobile Toronado "Sienna"

Past Cars

1937 LaSalle Cpe
1940 Chevrolet Cpe
1941 Ford 11Y
1954 Buick 48D
1955 Cadillac CDV
1955 Packard Clipper
1957 Cadillac Series 62
1962 VW Bug
1962 Dodge 880
1966 Mercury Montclair
1967 Buick Wildcat Convertible
1968 Chevy Chevelle SS
1968 Plymouth Barracuda
1977 Lincoln MKV

J. Gomez

Quote from: Bizzteacher on November 14, 2023, 06:43:53 PM1955 cadillac Coupe DeVille Can anyone point me in the right direction with my turn signals and brake lights? The brake lights stopped working all together and the blinkers only stay solid but don't blink. I tried changing the flasher but that didn't help. Also when the car is on both internal blinkers lights on the dash stay lit. Also one of the parking lights in the front stays on sometimes after I shut the car off and I have to disconnect the battery when parked so it doesn't drain the battery.

Hugh,

Your description indicates you may have a wiring/connector issue at the steering column and/or a bad/defective turn signal switch.

All the connections for these lights front/rear/dash panel, blinker and stop path go through the turn signal switch so you can start with the easy one and checking the wires are correct at the connector and jump over to the hard one the turn signal switch.

Just for validation you can check the bulbs are the correct ones and grounds to them are in good shape.

Good luck..!
J. Gomez
CLC #23082