News:

Reminder to CLC members, please make sure that your CLC number is stored in the relevant field in your forum profile. This is important for the upcoming change to the Forums access, More information can be found at the top of the General Discussion forum. To view or edit your profile details, click on your username, at the top of any forum page. Your username only appears when you are signed in.

Main Menu

Carter WCD 595s Float Level

Started by Art Cutler, April 08, 2024, 08:14:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Art Cutler

April 08, 2024, 08:14:37 PM
I'm rebuilding a Carter WCD model 595s carburetor for my '41 Series 62 Coupe (originally had Cater WDO).  I believe these were an option from '46-'49.  I don't have a service manual for these years.  Does anyone know the correct float level setting for this carburetor.  I have Carter tools T109-160 (9/64") and T109-162 (3/16").  I'm hoping one of these is correct.
Thanks!
Art Cutler
Series62, CLC #15689

V63

#1
April 08, 2024, 11:54:41 PM
One thing to keep in mind that these original measurements were not considering alcohol blended fuels.

The rule of thumb was the float was effectively parallel to the carb housing.

 With blended fuel I would adjust the float slightly lower than that to get the level where it needs to be.
Print
Go Up Pages1
User actions