Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Technical / Authenticity => Topic started by: Dan 11407 on April 04, 2006, 02:10:11 PM

Title: ECM Unit
Post by: Dan 11407 on April 04, 2006, 02:10:11 PM
Will the ECM unit from a 1986 DeVille work in a 1983 DeVille
Title: Re: ECM Unit
Post by: George Woodford clc21025 on April 05, 2006, 03:44:20 PM
Is it the same engine size and type, HT 4100?
Title: Re: ECM Unit
Post by: dan on April 07, 2006, 01:35:29 PM
Yes, Same type and engine size
Title: Re: ECM Unit
Post by: Mike #19861 on April 09, 2006, 08:32:27 AM

 Is this from a RWD to FWD deVille? If so it will not work.

 But, GM used the same ECM for many car lines in those days, just the PROM was changed to accomodate the car and engine. There will be a part number on the ECM. Compare it to the one from the other car. If they are the same, swap over the PROM and you should be good to go.

 But, the EFI systems did change significantly between 83 and 86. I could see one from an 82 to 84 be interchangible, as these cars were pretty similar.

 Mike
Title: Re: ECM Unit
Post by: dan 11407 on April 10, 2006, 10:54:54 AM
Thanks for the info. Both ECMS are from RWD cars, but the part numbers dont match. Ill have to look for a 1983 ECM and use my PROM in that one.
Dan
Title: Re: ECM Unit
Post by: George Woodford clc21025 on April 12, 2006, 06:06:02 PM
The ECMs are still available from the GM dealer for the 1983 Deville.  Cost is about $100.  ECM does not include the PROM.