I'm working on a 41 Cadillac 75 19. My rocker panels are all there but soft at places. I am capable of making replacements but want to know if anyone has ever reproduced them. The rockers would be exclusive for limos. with running boards. I want to replace the enyire rocker fender to fender. Thanks for any help . Mark
Quote from: 41ms7519 on January 15, 2018, 07:37:57 PM
I'm working on a 41 Cadillac 75 19. My rocker panels are all there but soft at places. I am capable of making replacements but want to know if anyone has ever reproduced them. The rockers would be exclusive for limos. with running boards. I want to replace the enyire rocker fender to fender. Thanks for any help . Mark
I'm 99% sure the answer is NO. I had to make my own. Was easier than trying to fit pre-made panels. The floors that are available are basically a waste of time. Easier to make your own if you have access to a brake, bead roller, etc. Good Luck!
Bobby
Thanks for your reply Bob. I figured I was destined to make my own. Not real hard but time consuming. Mark Shultz