1936 rectangular dash gauges, glovebox door, whole dash wanted

[joeceretti]

I thought you were looking for the gauges for a 37. I retract my suggestion that you buy those. Also, the reason for me posting my neat little matrix.

However, maybe they will fit and maybe you should buy them. Maybe they are the best you will find in the next 10 years. I just don't know.

Perhaps measurements are in order?

[Steve Passmore]

As I have both 36 and 37 cars I might be able to shed a little light on this subject. The 36 has a  darker color to the plastic faces, its much brighter in 37 but I have fitted the housing into both cars dash's when I was looking for the best ones for my 37 restoration so I would guess that accounts for the different part numbers so Bob is correct with the numbers, problem is if you use 37 gauge faces you really need the 37 speedo and clock faces to match,  I have had the gauge faces reproduced but the clock and speedo faces are a different matter as they are contoured and not so easy.

[Thomas Lindholm CLC#13781]

Hi John
I have an empty dash removed from a 1937 Series75. posting a couple of photos
Thomas

[johnwalker]

well it has the glove box door i need. interested, how much? any other switch items for it? thanks. i'll pm you.

[Dave4840]

HI JOHN:

I have a complete 1936  Cadillac model 60 for sale. It needs restored or can be a donor car. It is complete. Body parts inter- change

Only it has a V-8 as the LaSalle is a straight 8.


If interested please reply

thanks and regards, Dave 16293

[joeceretti]

What is your selling price and can you email me photos? My wife won't be happy but I will be.

I have a complete 1936  Cadillac model 60 for sale. It needs restored or can be a donor car. It is complete. Body parts inter- change

Only it has a V-8 as the LaSalle is a straight 8.

[Thomas Lindholm CLC#13781]

Hi John
I have sent some photos of my dash but they might have been to large, let me know if you got my mail
Thomas

[johnwalker]

thomas, i never got your email. i would be interested in the dash or just the glove box door. being that you're across the water it would be cheaper to send a small item. jwworkshop at aol dot com

[Thomas Lindholm CLC#13781]

Photos sent again, let me know if you get them
Thomas

[johnwalker]

got them, returned your email.  i still need a good glovebox door, a radio block-off and whatever goes in the two center holes to complete the dash.

[johnwalker]

Hello John, I just looked for the part numbers on each gauge (took them out) as posted by joeceretti and can't find any. So, I don't know if these will work for you or not. I can't make any promises. Let me know if you want to take the chance. It will cost $100 for the unit and guessing $12.00 for shipping. I can send tomorrow (17th) but I'm leaving and won't return until the 30th. You can shop around and let me know after the 30th.
Thank you,
Ty Stinson

ty, thanks, they fit fine. just a very slight bit darker than the speedo and clock, but hardly noticeable. you should have my check by now. 

[joeceretti]

GREAT! Photo?

[Stinson]

Hello John: Today (12/9/2013) there is a 1936/37 (same as needed by you) glove box door on ebay listed under New Listings.
Ty Stinson
CLC22330