1958 Cadillac parting out

[fishnjim]

Should be on my profile: fishn.jim2email addresses not permitted
but prefer you just send over the CLC my message system.   
If you get in a solid coupe, I might take the whole car.   Easier to transport.   Been looking for one for years.   I missed twice, third times a charm?

[Dexfoster]

Another 57 came in today. If you need 57 or 58 parts let me know what your looking for.
Thanks
Dex

[dn010]

Interested in:

The trim strip on the bottom of the trunk. Looks like rust and holes all over but I could still use it.
The two spears on the driver side rear quarter panel, one thin and one thick. Looks like the panel & trim took a whack at some point but better than nothing at all.
Door handles, all, if you think they are in better shape than the 58s.

Any chance of getting photos of the interior & trunk?

My emails is dani.b.5003 email addresses not permitted for further negotiations.

[Dexfoster]

I looked at the handles yesterday. The 58s are in better condition. Weather permitting ill get you pics and info over to your email Saturday.
Thanks
Dex
210 842 0373
Dex1244734@yahoo.com

[Dexfoster]

Dan Check your email when you get time, sent pictures.
Thanks
Dex
210 842 0373
Dex1244734@yahoo.com

[Jerry Galles]

DEx,
Did you ever get a chance to look at the items I sent for you to look for?
Jerry

[dn010]

I had sent an email last week following up about parts being discussed two months prior and haven't gotten a reply. Not sure what happened?

[Dexfoster]

Im back, i injured my spine. Looks like ill be getting surgery next week, so unfortunately im still going to be down and out for a bit. If i sent you pictures of parts i haven't sold any parts recently,  i cant pull anything at the time. If you need pictures i can probably get you some tomorrow, but as i said i cant pull parts right now. I apologize for the hold up.
Dex
Dex1244734@yahoo.com
210 842 0373

[harry s]

Dex, Sorry to hear about your back problems. Here's to a successful surgery and quick recovery.       Harry

[cevensky]

Dex- looking for a shift column for my 56 sdv. Don't need the lever, just the collar that slides on the shift tube.

[1959Fleetwood]

Hello Dexter,
i'm interested in the drivers side rear door vent window frame and glass from the 58 sedan & the lower splash shields at bottom of the radiator, also from the 57 & the 58 the remaining wiper arms. Please inform me with pricing and availability.
Thanks and have a nice day !
Matern Harmsel
CLC # 15331

[Dexfoster]

Dex- looking for a shift column for my 56 sdv. Don't need the lever, just the collar that slides on the shift tube.

I dont have 56 parts unless what your needing is same as 57 or 58
Thanks
Dex

[Dexfoster]

Hello Dexter,
i'm interested in the drivers side rear door vent window frame and glass from the 58 sedan & the lower splash shields at bottom of the radiator, also from the 57 & the 58 the remaining wiper arms. Please inform me with pricing and availability.
Thanks and have a nice day !
Matern Harmsel
CLC # 15331

Sorry for late response still playing catch up on parts orders and requests. Ill try to get pics of what i have left that you are looking for.
Thanks
Dex

[Paul Tesone]

Hello Dex - hope you are recovering . ..... I'm looking for a rust free 1957 Caddy trunk spare tire well . I don't need the entire floor - just the well . Pictures would be very helpful .   ... Thanks , PET .

[Paul Tesone]

Good Morning Dexter - I'm following up on my request for a rust free trunk wheel well . If you have one , could you verify that the dimensions are what I need for my 57 Caddy ? The 58 well may be the same as a 57 . Attached is a diagram with measurements . ... Thanks , Paul Tesone CLC #6876

[Dexfoster]

Hows it going paul. The only decent one i had left as with the complete car. It needed 2 patches. I have not picked up any recently but ill check my storage sometime this week.
Thanks
Dex
210 842 0373
Dex1244734@yahoo.com

[Paul Tesone]

Thanks , I'll have my restorer put the trunk on hold until I hear from you . .... Paul Tesone CLC #6876

[mezach529]

Do you happen to have the hot gas bypsss valve on the factory AC compressor

[Paul Tesone]

 Dex - did you ever get to look for a good 57-58 Caddy spare tire wheel well ? If you have already responded , I never received the response . .... Thanks , Paul Tesone CLC #6786 .

[Dexfoster]

Yes sorry i thought i sent a pm or email. The only one i have left has the bottom rotted out.
Thanks
Dex
210 842 0373
Dex1244734@yahoo.com