Caddy parts mostly 50s-60s, some 70s-Can deliver to Hershey

[Chuck Swanson]

Can deliver to Hershey or points on the way, or pickup in Syracuse NY.  Pic is just some of the cars saved from the crusher.


Many bumper ends from 1962-1973, some with light assemblies, all good cores and some good daily drivers.
'66 rear bumper ends-commercial chassis-NOS but shelf wear $400
'66 rear center bumper cores (6) $75 each
'66 rear seat vert $150
'66 rear seat sedan $100
'66 sedan front seat $150
'66 Sedan molding set $400
'66 Sedan doors
'66 vert pass 1/4 panel
'66 Bucket seats (no head rests), one set left-poor shape
'67 NOS door-2 door $250
'66 Hood, Surface rust in spots-solid. No molding/emblem, no bottom front piece.  $350
'64 wheels, blasted and painted , $150 each
429 intake manifold, repaired by PO $40
429 heads, used and rebuilt
429 Exhaust manifolds needing repairs.  Have 10 sets in various conditions, some with very tiny repairs needed around bolt holes, to some with larger cracks. Send a PM with side needed and I can send pics or make offers 
'64 429 timing chain covers, al looked over by machine shop, no broken bolts or missing pins.  Oil passages by pump all usable,
Many skirts-almost all 60's
'59 Carter carb core, $100
'55-57 air cleaners $100 each (Not the triangle shape-round with side vents)
'65-66 rear quarter moldings (not Eldo)-some have dings but probably repairable,  have 14 sets. $150 set for the fair ones, $250 set for the ok ones, and $450 set for the nice ones.
1960 grills
50s-60s generators -eight total
'50s NOS trunk carpet
'50 Radios 8 total, $100 each

'66 Center rear bumper cores without trim, 8 total, $90 each
'66 Fenders with typical repairs needed at bottom, $150 each
'66 inner fenders, Already blasted and painted, but were not show quality (had some minor dings and such), so I found another better set.  $150 each
'66 heater core non AC cover, blasted and painted.  Found a better one that didn't have as many pits.  $250
'66 Speedos, used 6 total
'66 Cowl
'66 Hoods
'66 Trunk lid
'66 Wheels, Blasted and black powder coated, or used (sold)

'65-66 dashes 4 total, AC and non

Bumper ends:
65-66 top bumper ends $75 each
62-64 ends $125 each
64 bottom bumper end solid $450
64 front bumper-complete, good core or driver $1500

57 Fleetwood bottom quarter molding, pair $400
57 Fleetwood double red lights with chrome, $75 each
'57 Fleetwood rear top 1/4 molding $45

4 1955 Kelsey Hayes wheels.  Nice set with no curb rash $900 (sold)


NOS '55 rocker panels
50s steering column/wheel
1966 front bench seats-core (3 sets, Fleetwood, sedan and vert) without trans/motors, $150 each bench.
1966 rear convertible seat
1965 and 66 bumper cores
66 doors -convert
'64 Transmission
'64 429 bare block (crack in valley pan area)
'65 Grills
8 generators
50's water pump...looks new

15 pairs of skirts, mostly 50's.
50's flat glass/windows-not in best shape

About 250 pieces of moldings 50s-60s...if interested in these pieces, please send me a pic of what you need or measurements.
NOS green 60s mats-have a few cases of these
Thanks, Chuck

[pippinfam5]

Can you send me pics of anything you have for a 57 cdv?

I need a new steering wheel, and a pit of trim on the back passenger side. 

Thanks.

Cade Pippin
pippinfam5@yahoo.com

[Chuck Swanson]

Just have door weather-stripping left for '57

[Chuck Swanson]

I can deliver any large items to the GN in Chicago, or any points along the way.  Leaving 6/21 from Syracuse NY area. 

[jmurrayent]

Might you have a 65 tilt/telescopic column and wheel? 

[Chuck Swanson]

Have one just removed from a '66 only, so not the stainless type like in '65 

[Chuck Swanson]

Will be in the Green field with my local club for Hershey 10/3/22 week.  Please let me know if interested in any of the parts below, especially the large items. Have many parts for 65-66, with a lot of parts cars.  Thanks, Chuck

[Dave CLC#16900]

Hi Chuck, would the trunk carpet happen to be red and correct for a 1956 Eldo with Air?

[Chuck Swanson]

No, carpet is tan, and for a coupe/sedan after checking box. thanks

[mark22]

Hello, sir. Might you have the 4 way front seat motor for a 54-56?

Thank you

[Wbostoen]

Hello Chuck,

I am looking for a few parts for a '66 eldorado:
-Fender script letter 'R'
-Front Right lower bumper end
-Rear left bumper end
-Rear Left quarter end molding (the trim piece surrounding the rear bumper end)
-Switch pitch/Transmission kickdown switch (including bracket)
-Cruise control slider knob (only the knob)

Optionally:
-a rear main bumper bar. Mine is nice driver quality, but looking for a really nice one.

Could you PM me an offer for the parts you have?
Thanks

[Chuck Swanson]

Hello, sir. Might you have the 4 way front seat motor for a 54-56?

Thank you

No on that

[Chuck Swanson]

Hello Chuck,

I am looking for a few parts for a '66 eldorado:
-Fender script letter 'R'
-Front Right lower bumper end
-Rear left bumper end
-Rear Left quarter end molding (the trim piece surrounding the rear bumper end)
-Switch pitch/Transmission kickdown switch (including bracket)
-Cruise control slider knob (only the knob)

Optionally:
-a rear main bumper bar. Mine is nice driver quality, but looking for a really nice one.

Could you PM me an offer for the parts you have?
Thanks

OK have some of above.  Will PM.   Thanks, Chuck

[Chuck Swanson]

Hi All,  Will be at Hershey again this year, spots right in front of Giant center entrance in Green field.  Can bring some of the large items listed in this post if interested.  Many 65-66 large parts.   Thanks, Chuck