News:

Please note that the Forums will be in Maintenance Mode, i.e. not accessible, this coming Wednesday, May 15th, This is to make backups and carry out the changes to make the forums only allow posting by CLC members. The start of the transition is planned for around 9 a.m. EDT, and is expected to last between four and eight hours.

Main Menu

door hinge

Started by Nick Campagna, March 28, 2005, 01:59:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Nick Campagna

March 28, 2005, 01:59:19 PM
I have a 1976 Eldo. The drivers door hinge has a second pin with a bearing that presses the door scallop. Is the second pin and bearing rebuildable?

Mike #19861

#1
March 29, 2005, 08:48:45 AM

 If this is the detent you are referring to, generally they are not rebuildable. The hinge will have to be replaced.

 But, door hinges for many GM cars were the same. Chances are you could find one off a C-body car and it will bolt right on. For example, I replaced the lt frt lower hings on my 86 Fleetwood with one from a 1988 Caprice.

  Mike
Print
Go Up Pages1
User actions