News:

Reminder to CLC members, please make sure that your CLC number is stored in the relevant field in your forum profile. This is important for the upcoming change to the Forums access, which the board has delayed until May 15th to give users who are not CLC members time to sign up for the club, More information can be found at the top of the General Discussion forum. To view or edit your profile details, click on your username, at the top of any forum page. Your username only appears when you are signed in.

Main Menu

1956 Eldorado Seville - Ribbed floor mats ?

Started by Zwildman1, October 04, 2020, 06:25:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Zwildman1

I am looking for a source for the ribbed floor metal pieces that attach to the carpet under each seat including the rear seats as pictured.  The picture is off the internet as an example.  Any ideas on a source to help me finish my restoration?  Thank you for your assistance.

Mike Josephic CLC #3877

I assume that you refer to the ribbed aluminum
floor pieces that are on the driver and passenger
side -- two in the front and two in the rear.
They also have rubber inserts between each rib.
They were used in the Eldorado vs. standard floor
mats.

If you need the aluminum mats themselves, to my
knowledge nobody is reproducing them. You will
have to obtain those from a parts car.  These are the
same for 1955 and 1956.

If you are fortunate to find a usable set, the rubber
inserts (black only) are reproduced by FEN Enterprises.
http://fenenterprises.com/index.html

Good luck,

Mike

1955 Cadillac Eldorado
1973 Cadillac Eldorado
1995 Cadillac Seville
2004 Escalade
1997 GMC Suburban 4X4, 454 engine, 3/4 ton
custom built by Santa Fe in Evansville, IN
2011 Buick Lucerne CX
-------------------------------------
CLCMRC Museum Benefactor #38
Past: VP International Affiliates, Museum Board Director, President / Director Pittsburgh Region

Zwildman1

Yes, that is what I am referring to.  Thanks for the insight on a portion of the material. 

denniscaddy

I have one (of 4).  It is not the driver's, which is different.

Very hard to source these.

dennis@caddyparts.com

Dennis
CLC 3676
1941 Fleetwood 60S
2017 CT6

brian faull clc#25881

I might have a set. I will look through my stuff this week. Thanks, Brian.
brian faull clc#25881

Bigfins (Dan Morehouse CLC 16464)

I have several sets... and 55's and 56's are different for the drivers side front.  I've only had 55's that were black, but I have had several different colors from 56's.


Mike Josephic CLC #3877

Yes, there were multiple colors available for 1956
for the rubber inserts including, black, red, blue and
green.  However, I am not aware of anybody
reproducing those.  So it may be a mate of black or
nothing.

Mike
1955 Cadillac Eldorado
1973 Cadillac Eldorado
1995 Cadillac Seville
2004 Escalade
1997 GMC Suburban 4X4, 454 engine, 3/4 ton
custom built by Santa Fe in Evansville, IN
2011 Buick Lucerne CX
-------------------------------------
CLCMRC Museum Benefactor #38
Past: VP International Affiliates, Museum Board Director, President / Director Pittsburgh Region

brian faull clc#25881

I looked through my parts, I have a set of 4 with black ribs. The fronts are the same size, so I believe they are for 1954. If you are interested, let me know.
I will try to post some pictures later. Thanks, Brian. 412 952 6027. cadillac32v@hotmail.com
brian faull clc#25881

brian faull clc#25881

Here are a couple pictures of the set of 4 that I have. Thanks, Brian. 412 952 6027. cadillac32v@hotmail.com
brian faull clc#25881