News:

Please note that the Forums will be in Maintenance Mode, i.e. not accessible, this coming Wednesday, May 15th, This is to make backups and carry out the changes to make the forums only allow posting by CLC members. The start of the transition is planned for around 9 a.m. EDT, and is expected to last between four and eight hours.

Main Menu

Need a picture of a 69 DeVille Prop Valve

Started by Vinny CLC# 16477, February 27, 2005, 12:20:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Vinny CLC# 16477

February 27, 2005, 12:20:59 PM
I am converting my 66 front drum set up to a Disc set up.  Can somebody take a picture of the under hood set up of the hold-off(prop valve) and tubing and send it to me?  Also a picture of the master cylinder with the prop valve attached along with the tubing going down to the distibution block on the frame. This would really help.  Thanks in advance!!!

Lou 19058

#1
February 27, 2005, 12:34:56 PM
If pics of a 70 will due,I can send them to you. I also have the brake line diagram. I do recall the 69 being somewhat different though.

Vinny CLC# 16477

#2
February 27, 2005, 02:29:23 PM
Please do so.  Any help would be appreciated.

Alfredo

#4
March 03, 2005, 12:59:38 PM
HI,
Just sent mail to your accounts.
Im doing the same Conversion. Except with a 64 caddy.
Can you guys post the message to the board?
Ive got a prop valve from (I think a 69) and (I think a 70). They are two different beasts. Im not sure which to use.

Im also not sure if I should change to a 70 master cylinder/booster?
What are you doing vinnie?
-al
Print
Go Up Pages1
User actions