I have lots of parts that I would like to sell. However, if you are looking for that impossible -to - find part, I probably don't have it. For example NOS side trim for a 59 Eldo! Please contact me directly. Thanks, Bob
BOB I HAVE A 1931 CADILLAC 370A 2 DOOR RUMBLE SEAT COUPE DO YOU HAVE ANY PARTS ,IF SO WHAT DO YOU HAVE . THANKS STEVEN 949-280-4771 CELL.
I'm looking for 16 inch Sombreros. Any chance ?
Mark
Steven & Mark, sorry, nothing. Bob
Hi,
Am probably adding to the list of items you don't have, but thought I'd give it a shot anyway. Need: 1) 6volt pos ground ignition coil; 2) the three (well 6 actually) exterior chrome/stainless steel strips that go under the doors of a '40 60'S. Thanks
Ray, you're right. Sorry, Bob
Hey Bob,
Not sur eif you can help me,I'm looking for headlight and sidelight lenses for a 1931 V12 (370A)
Cheers,
Willow
Willow, I don't have any. Be thankful you're not looking for V16 ones. My suggestion is to contact long time CLC members that have a car. They may have spares to selll. HTH, Bob
Quote from: Bob Hoffmann CLC#96 on November 14, 2008, 10:14:19 PM
I have lots of parts that I would like to sell. However, if you are looking for that impossible -to - find part, I probably don't have it. For example NOS side trim for a 59 Eldo! Please contact me directly. Thanks, Bob
Got anything for a 1975 Eldo?
Yes, nice western stuff. Send me your want list directly by clicking on my email on my my post. Thanks, Bob
Do you have horizontal shocks for a 68 Eldorado?
Glen
No shocks, but I have lots of other parts. Bob
Bob:
Looking for an antenna for my'41 Conv. Cpe.
Also need fluted trim for the front seat base.
Thanks, Phil
Come on guys, give me an easy one! LOL Phil, if I don't have your car on my 41 conv. roster, please send me all the info from your data plate. If anyone else has a 41 conv. car ,cpe or sedan, please do likewise. I doubt that I have those parts but I will check. Bob
Quote from: Bob Hoffmann CLC#96 on February 22, 2009, 01:13:40 PM
Come on guys, give me an easy one! LOL Phil, if I don't have your car on my 41 conv. roster, please send me all the info from your data plate. If anyone else has a 41 conv. car ,cpe or sedan, please do likewise. I doubt that I have those parts but I will check. Bob
Bob, I have a 54 Coupe De Ville and are looking for nice fender curved pieces, as I know them, the piece that comes off the hood bar and wrape around to meet the fender trim?
Bob,I have a 54 Coupe De Ville and are looking for nice fender curved pieces, as I know them, the piece that comes off the hood bar and wrape around to meet the fender trim?
How about rear bumper end impact strips for a 73 deville/fleetwood? These are the triangular pads on the rear bumper ends. Same part # for either side according to the parts manual.
Quote from: rodster56 on February 22, 2009, 04:26:00 PM
Bob,I have a 54 Coupe De Ville and are looking for nice fender curved pieces, as I know them, the piece that comes off the hood bar and wrape around to meet the fender trim?
I have some nice ones marked 1955 & they probably are. Guess I can't help. Bob
Quote from: Bob Hoffmann CLC#96 on February 22, 2009, 10:35:39 PM
I have some nice ones marked 1955 & they probably are. Guess I can't help. Bob
Are they smooth, or do they have a groove in the wrap around area that meets the hood bar. I made the same mistake and bought two that were gorgoeus, ended up being for a '55, I'm learning slowly, but the wifes ready to cut my head off.....
Which ones are which? Bob
Quote from: Bob Hoffmann CLC#96 on February 23, 2009, 11:21:06 AM
Which ones are which? Bob
The 55 has a groove that meets the hood bar with a groove, plus the 55 are longer wrapping around.
They are 55's. Bob
do you have a front right quarter panel for a 1970 cadillac coupe deville?
Vidal, that part is called a fender. There's no such thing as a front 1/4 panel. I don't have one. Almost all of those fenders are rusted at the bottom. I suggest repairing yours. I have lots of trim pieces, moldings, ETC. Please send me your want list directly by clicking on my email. HTH, Bob
Looking for the drivers side door garnish moulding for a 37 LaSalle convertable. Also need running board chrome. Can you help?
No. The molding might be the same on other 37/38 GM cars. Hopefully the R/B trim was reproduced. I may have a map lite. Bob
BOB! I'm looking for a fuel economy indicator switch that is attached to the firewall for a 1975 & 1976 de Ville, Eldo, etc. See if you have one that is working. EAM
Bob,
You've probably already read my post for a lower right front bumper end for my '65 Coupe by now. I am looking for one in better then "daily driver" shape....If you have anything that is close please provide a picture if possible....however, If you have a brief list of any other '65 parts you may have, I am always looking to upgrade when possible....Thanks a ton, Eric
Eric, yes I saw it. I have none, but I do have lots of nice western parts available. Send me your want list directly by clicking on the email on my post. Thanks, Bob
Reply to EAM, sorry, no. Bob
Bob: I could use a good working speedometer for my 41 Conv. Cp. Also the chrome or stainless trim for the inside of the doors at the bottom and I think the front seat as well. And a steering column - and maybe I should get a list together. The 41 Cp custom, is it a by any chance a Series 61. Paul Price 23300 ppmap@gosnc.com
Paul, the coupe is a 62 series as I listed it. Give me a call some early evening. Regards, Bob
any chance you have a heater control valve or t/t steering wheel for a 67
Hi Seth, I don't have the steering wheel, But I do have a NOS heater control valve for $100 plus shipping. Bob