Print Page - '58 Brougham restoration help

Title: '58 Brougham restoration help
Post by: gary c. on September 30, 2013, 02:45:05 PM

I have been commissioned to finish the restoration of a '58 Brougham that is about 2/3 complete. Any photos or input would be appreciated. Right now I could use a little input on the dash area. Photos of the dash bracing and the exact layout of the dash wiring harness. enclosed is a photo of the cars current status. Thanks for any input.

Title: Re: '58 Brougham restoration help
Post by: okccadman on September 30, 2013, 09:50:23 PM

Is this the Oklahoma City car?

Title: Re: '58 Brougham restoration help
Post by: gary c. on September 30, 2013, 09:58:53 PM

Yes sir it is. I work for Jim Collins here in OKC and we have been commissioned to finish this project.

Title: Re: '58 Brougham restoration help
Post by: gary c. on October 01, 2013, 12:44:48 PM

O.k. First question if anyone can answer. The heat/ac levers, are they model specific to the Brougham? Or are they available anywhere? I have one that is broken. I've got an idea for a fix in the mean time.

Title: Re: '58 Brougham restoration help
Post by: INTMD8 on October 01, 2013, 02:37:53 PM

Hello Gary,

There are many people with Brougham knowledge on this site but you may also want to register at www.eldoforum.com as there is a Brougham specific section.

Title: Re: '58 Brougham restoration help
Post by: gary c. on October 01, 2013, 02:51:08 PM

Thanks, just did that about 30 minutes ago. Guess I should delete this thread.

Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Restoration Corner => Topic started by: gary c. on September 30, 2013, 02:45:05 PM