Print Page - Pipe- Brake filler tube to master cylinder

Title: Pipe- Brake filler tube to master cylinder
Post by: 57flw on July 28, 2012, 10:05:02 PM

Hi Guys,

With a little help from my friends, in regards to the photo, this is what I am in need of.

Can someone provide this for my 1957 Fleetwood!

Ken

Title: Re: Pipe- Brake filler tube to master cylinder
Post by: Mike Josephic CLC #3877 on July 28, 2012, 11:00:49 PM

Looks like something you could make with some tubing and a bending
tool. Should't be too hard.

Since it's just a filler tube, not under brake line pressure, you could likely
make it from copper tubing -- it's easier to bend and flare than steel.

The filler tube on my '55 is similar, but straight metal all the way down
from the filler cap (no rubber hose as I see in yours).

Mike

Title: Re: Pipe- Brake filler tube to master cylinder
Post by: 57flw on July 30, 2012, 12:27:19 AM

Pipe sorted out.

Many thanks.
Ken

Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Want To Buy - Cars => Topic started by: 57flw on July 28, 2012, 10:05:02 PM