Text only | Text with Images

Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Want To Buy - Cars => Topic started by: Narcissus on September 17, 2014, 12:10:52 AM

Title: WTB 1960 Spear Side Moldings for Sedan
Post by: Narcissus on September 17, 2014, 12:10:52 AM
I am looking for a full set of "spear" side moldings that run the length of both sides of the car for a 4-door. I'll be beginning a resto on my 1960 Sedan DeVille 6 Window next year and I'm looking for the parts I don't have (fortunately I have 98% of the trim pieces, whew!).
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Michel Ouellette on September 18, 2014, 01:43:54 AM
Hi, have tryed, nosandrestoredcadillacparts.com, all kinds of nos for you there.

Michel
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Ken Perry on September 18, 2014, 03:53:06 PM
Hi,I have the 4, door pieces and the 2 quarter pieces of side stainless for a 1960 Cadillac Sedan deVille,that I would sell. They need some work,but I'm sure a stainless guy could make them perfect . If you are interested,I will take $350 plus shipping for the 6 pieces.    Ken Perry
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Narcissus on September 19, 2014, 02:52:51 PM
Ken. Can you send me a picture of the pieces. I'm certain I'll buy them but I'd like to take a peek at 'em. Thanks!

If I read that correctly, I would need to find the two front pieces still, right?
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Ken Perry on September 19, 2014, 03:42:03 PM
Yes you would still need the fender spears. I will get a picture for you tomorrow.Ken Perry
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Narcissus on September 19, 2014, 03:43:27 PM
Sounds great. Thanks Ken!
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: n2caddies on September 20, 2014, 02:09:53 AM
I may have the front spears. If interested I will look for them.
Randy. Rgeorgeconst@aol.com
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Narcissus on September 20, 2014, 02:14:22 AM
If you could look that'd be greatly appreciated! nosandrestoredcadillacparts.com has a pair I've been eyeing but I'd like to take a look at what you have.
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Ken Perry on September 20, 2014, 11:49:06 PM
Didn't get a chance today, to take any pics of the side trim,to many people came by! I'm going to a car show tomorrow,if I can I will take the pics after, if not, Monday. Ken Perry
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Ken Perry on September 24, 2014, 01:22:07 AM
I got them out of storage today,I will clean them off tomorrow and get some pics for you. sorry for the delay. Ken Perry
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Narcissus on September 24, 2014, 07:12:46 PM
Sounds great, Ken. No worries. It would be greatly appreciated if you could include in the pics, or at least post and let me know about, any broken off mounting pins on all the pieces. Thanks.  :)
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Ken Perry on September 24, 2014, 08:00:18 PM
Here are two pics showing what I have. 3 pins on one quarter piece are gone,would be easy to fix the metal is still there and not rusted out,so new ones can be tacked on.  Let me know what you think. Ken Perry 
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: Narcissus on September 25, 2014, 12:55:51 PM
Those look great Ken! I'd love to snag 'em. If you can, PM me once you figure out shipping and final cost. I'm sure it won't be easy with the length of those rear quarter pieces. Thanks so much!

Nick
Title: Re: WTB 1960 Spear Side Moldings for Sedan
Post by: denniscaddy on September 27, 2014, 11:33:36 AM
Hi,
I have one front fender molding.  It is not pitted at all, and the chrome is nice.  The front stud is broken, but the other three are good.

If interested, email dennis@caddyparts.com

Thanks,

Dennis Akerman, CLC 3676
Text only | Text with Images