Hi all,
I really enjoy the restoration threads on the forum so thought I'd take a shot at creating one for my next project. The car is a 1960 Coupe DeVille in original Persian Sand. I love the colours and think she will be beautiful when completed. As you can see from photos, she's pretty much complete but appears to need everything (hence the "resurrection"). I purchased the car in the Fall of 2011 - hard to believe that I'm just going to get started on it now, but it seems like too many other projects and commitments always get in the way. My last couple of project cars have also taken too long to complete, so I'm hoping to move this one forward a steadier and quicker pace.
I'll be moving the car to my shop in the next couple of weeks to begin the disassembly and will try to post periodic updates on this thread. I'm sure there will be many questions along the way, but it's all part of the fun. I love the restoration process as much as driving them when done and am really looking forward to getting started and returning this gem to her former glory. There is a sticker in the window with a New York registration from 1972 - I would not be at all surprised if that was the last time this girl was on the road!
Trevor,
Yes, a little dirt and grime, but the bones are there.
This is the way I like to start my projects too.
Although, my experience is with the 59's, they are almost the same car, 60's are the little fin brothers.
Please post pics - we all love them.
If I can be of any help, just let me know - or post your questions.
Have fun,
Steve Butcher
slynnbutch@sbcglobal.net
Well, I had every intention of updating this thread with the progress of my restoration of my 1960 CDV. It's been awhile and I've made some decent progress. The car was totally disassembled and media blasted. It had more rust than I expected and required quite a bit of metal work. The body was taken off the frame, the frame was also blasted and coated with Eastwood's frame paint. The underside of the car was painted with Raptor bed liner, which is a good product. The motor has been rebuilt. I ordered original materials for the interior from SMS and the front seat has been redone. Brakes, starter, generator and carb all rebuilt. Car is currently at the body shop and the guy is about as slow as they come. Anyways, that is the short update. I will look for some photos and upload them so you can all see the progress.
Trevor
A few pics of this wreck, before really digging in.
Pulling the motor and transmission:
Disassembly:
Engine back from the machine shop (painted Ford blue, ugh):
Rusty firewall around the heater core that needed a patch panel:
Trunk lip was rusted right off, so needed to get a patch from another car and weld it on:
Taking the body off of the frame. Not as bad as I thought it was going to be.
Oh crap, this turned out to be a lot rustier than I was expecting:
Good thing I had a solid parts car. Both left and right sides of the front rocker and floors had to be sectioned in (I had to call in the pros for this job, as I was afraid of getting everything out of alignment.
Very nice work, big project. Since you are restoring the car so thoroughly it would be seem an important thing to get the details right and at least paint the engine the correct Cadillac Blue. Cadillac Blue is available from Bill Hirsch or at a minimum you can come real close mixing your own with Rustoleum Royal Blue and Black using an enigne part with original paint to help match --- if you have such a thing lying around.
http://www.hirschauto.com/AEROSOL-ENGINE-ENAMEL/productinfo/EEA-SPRAY/CAD%20DK%20BLU/
Quote from: 35-709 on October 07, 2018, 10:57:05 AM
Very nice work, big project. Since you are restoring the car so thoroughly it would be seem an important thing to get the details right and at least paint the engine the correct Cadillac Blue. Cadillac Blue is available from Bill Hirsch or at a minimum you can come real close mixing your own with Rustoleum Royal Blue and Black using an enigne part with original paint to help match --- if you have such a thing lying around.
http://www.hirschauto.com/AEROSOL-ENGINE-ENAMEL/productinfo/EEA-SPRAY/CAD%20DK%20BLU/
Yes, the engine has since been painted the correct Cadillac blue (just way behind on my photos). Agree the Bill Hirsch paints are good (and what I used). :)
Fitting in the section on the passenger side:
Trevor,
Gr8 pics.
Glad you are going the extra mile to make the repairs few would see and others most often shine on.
35-709 is right that if you are going so far as you have, and with period correct fabric from SMS, you should get the Hirsch paint - spray cans (the way to go) or a can to mix and spray yourself.
A little advice - buy, don't mix (pain in the as...) - and if ever you photo the completed engine bay, it will show as the proper color - pics don't lie.
More pics.
Have fun,
Steve B.
Fitting the driver side section and the rusted sections that were cut out:
Getting ready to media blast the body and frame (Grouchy neighbour didn't like this and called the City on us to complain):
Media blasting:
Down to the bare metal. No more rust!
Coating the body with epoxy:
Painting the frame with Eastwood's frame paint, including the inside of it so that it's totally protected:
Not sure why the photos are getting rotated, they aren't like that on my computer...
nice! That is a lot of work! Keep going! 8)
How did you get rid of all that sandblasting media?
How did you paint the frame from the inside?
Best regards,
Nicolas
Trevor,
After media blasting, nothing stands out more to me as a milestone is wrapping the body in primer.
It just makes it look like a car again.
Take a deep breath and hit again for the next steps of the adventure.
Have fun,
Steve B.
Quote from: DeVille68 on October 07, 2018, 03:05:18 PM
nice! That is a lot of work! Keep going! 8)
How did you get rid of all that sandblasting media?
How did you paint the frame from the inside?
Best regards,
Nicolas
Getting rid of all of the media is hard - vacuum, compressed air, repeat about 5,000 times and then still have sand coming out of it.
Eastwood sells a product to paint the inside of the frame. It's basically an aerosol with a long hose with a spay end on it that you insert in the holes of the frame and move around to get coverage.
Quote from: 59-in-pieces on October 07, 2018, 08:18:49 PM
Trevor,
After media blasting, nothing stands out more to me as a milestone is wrapping the body in primer.
It just makes it look like a car again.
Take a deep breath and hit again for the next steps of the adventure.
Have fun,
Steve B.
Thanks Steve. I'm so far behind on updating this thread - the primer was probably sprayed a year and a half or even two years ago!
The front seat redone. It came out great (plus a pic to remind you what it looked like before):
Engine back on the frame and front suspension redone:
Stripping the underside to bare metal and covering with Raptor bedliner. The car had a heavy undercoat, so this was a huge, time intensive job. I even ended up hiring a local kid to help for a few hours as I'm getting too old to lay on the cold concrete for hours and days on end.
Putting the body back on the frame:
Doing some more patch work on an area by the rear window that was rusted out pretty badly. Because of the contours of this area I wanted to try to track down a patch panel. I ended up getting one from a guy in Sweden - he had a dry Arizona car that had been used as a parts car, so this patch travelled from Arizona, to Sweden and then to me in Canada to find its way onto my car.