how do you remove the front bushing of the rear leaf spring on a 56 Cadillac that has been rusting for years thank you
Id imagine the same way any old rusty stuff is removed, with a torch, a big hammer, and ALL of the cuss words. 8)
Aerokroil is good stuff, impact wrench, hammer. Keep at it.
I have a small bolt on my mantel inside as a trophy. It was bolted down on the inside of my bench seat in my 50 cadillac since installed in the factory. Terrible access for heat, or even a wrench because the floor raised around it. Too tight for a socket. Anyhow, I ended up using lots of lube, and a sharp chisel, knocking the edge of the bolt with the chisel and hammer as to "walk" it out. Took me 3 evenings and I FINALLY got it. I wanted to save the threads so I could rebolt the bench down when I was done repairing the floorboards.
Patience. Persistence.