Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Want To Buy - Cars => Topic started by: CadDad on February 12, 2018, 08:05:47 PM

Title: 322 Engine Block
Post by: CadDad on February 12, 2018, 08:05:47 PM
 Hello,
  Started working on my 37 LaSalle coupe a little while back. The car sat for 10 years in a garage on jack stands and was pretty much left alone. Previous owner did a body off restoration and then got sick and was in a nursing home. Brought car home and found right off that it had coolant in the oil. Removed the heads and found one cylinder had a crack and another had been scored by a broken ring. I have a guy who can rebuild the engine ,but will magnaflux it first. If it has more cracks or other issues, I may be better off finding a good block and go from there. My question is did LaSalle use the same 322 from 37-40? Does anyone in the group know of any suppliers or have a good block to sell, should I need to go that route? I kind of expected something like this might happen, but the rest of the car was in such good condition that I really couldn't pass it up. Many thanks in advance!   Paul
Title: Re: 322 Engine Block
Post by: DaveZ on February 14, 2018, 10:37:40 AM
Hi Paul,
37 is different than all the other years. You can use other years, but the cranks are different, starters are different, flywheels, dipstick etc. There are a lot of variables you need to be aware of, but you can do it. You can even use a 345, but of you do make sure you get the 345 flywheel and pressure plate with it.
Regards
Title: Re: 322 Engine Block
Post by: Steve Passmore on February 15, 2018, 05:42:10 AM
Quote from: DaveZ on February 14, 2018, 10:37:40 AM
Hi Paul,
37 is different than all the other years. You can use other years, but the cranks are different, starters are different, flywheels, dipstick etc. There are a lot of variables you need to be aware of, but you can do it. You can even use a 345, but of you do make sure you get the 345 flywheel and pressure plate with it.
Regards
-


That should read 346 Dave
Title: Re: 322 Engine Block
Post by: DaveZ on February 15, 2018, 04:05:42 PM
Doh...I should proof read:-)
Title: Re: 322 Engine Block
Post by: CadDad on February 17, 2018, 06:31:03 AM
My engine guy will magnaflux the engine early this week and hopefully it can still be used. Otherwise I will keep looking. Thanks.
Title: Re: 322 Engine Block
Post by: tripwire on February 26, 2018, 09:18:06 PM
Did you talk to this guy?

http://forums.cadillaclasalleclub.org/index.php?topic=148773.0 (http://forums.cadillaclasalleclub.org/index.php?topic=148773.0)

Title: Re: 322 Engine Block
Post by: CadDad on February 27, 2018, 04:17:56 PM
 We got the engine torn down and found that it was not as bad as previously thought ,but thanks for the info. I may call him anyway. Paul