Guys,
I have so many parts left. Spares for cars I no longer own & parts from cars before they got crushed. If you were interested in a part I advertised in the past & felt the price was too high, feel free to make a fair offer. ALL my parts are good used or NOS. NO salt belt junk here.
Bob
Bob,
My son is looking for the gas pedal assembly for his '59 Six Window.
Any chance you might have one or a recommendation where he might look elsewhere?
Thanks in advance.
Bill Rodwick
CLC#29203
Bill,
I don't have it. Try lcamuso@msn.com. Tell him I sent you.
HTH, Bob
Bob,
I'll give it a shot.
Thanks.
Bill Rodwick
CLC#29203
Any 60 parts
Bob,
Any for a 47 Convrt.
Rear bumper ends for a 57 Eldo.
I may have asked, and if so, sorry.
Have fun,
Steve B.
what parts for a 56 do you have
Quote from: lishka on July 01, 2018, 08:21:02 PM
what parts for a 56 do you have
I may have some gold horizontal grill bars. Any interest ??
Quote from: 59-in-pieces on July 01, 2018, 06:38:06 PM
Bob,
Any for a 47 Convrt.
Rear bumper ends for a 57 Eldo.
I may have asked, and if so, sorry.
Have fun,
Steve B.
I have some conv. type sun visors. One end is rounded, the other end is a straight cut. I can send pics. As far as the rear bumper ends... you'll need to ask Santa or the Easter bunny. LOL
Bob
ANY 1975 ELDORADO PARTS? DAN75CADemail addresses not permitted
I have a nice used LH rear bumper end. I also have a NOS quadrant & indicator assy. The spring loaded cable usually cuts thru the plastic.
1940 60S non-sidemount front fenders? Or a good lead. Series 62 could probably be modified at the rear to fit.
John,
I have a pair of 62 series fenders Non side mount. Sort of rough but might work for your needs. Please contact me directly at bobscads@comcast.net
Bob
I’m looking for a Carter Carberator
WD-O for a 1940 lasalle.
John Scanlan
I’m looking for a front set of red seat belts for a 69 Deville.
ANY 1975 CADILLAC ELDORADO CONVERTIBLE PARTS. DAN75CADemail addresses not permitted
Hi Bob, Just wondering what you have left from 1940? I am interested in LaSalle parts. Thanks. Scott
Quote from: DMirrione on July 29, 2018, 09:40:15 PM
I’m looking for a front set of red seat belts for a 69 Deville.
I may have a set of tan. They may be able to be dyed. No reds.
Thanks, Bob
Quote from: D DOWNARD on July 29, 2018, 11:45:33 PM
ANY 1975 CADILLAC ELDORADO CONVERTIBLE PARTS. DAN75CADemail addresses not permitted
Dan,
Nice LH rear bumper end.
NOS plastic quadrant. The one that they cable cuts into & then brakes.
Maybe some interior light lenses.
Bob
Quote from: scott c. 40 LaSalle on July 30, 2018, 02:02:48 AM
Hi Bob, Just wondering what you have left from 1940? I am interested in LaSalle parts. Thanks. Scott
Scott,
What do you need?
Bob
any 49 parts?
Looking for a red steering wheel with the inlay wood grain in the rim 71-76?
Tilt & telescopic, also any parts for 79 Deville's
Quote from: guyrobert on August 01, 2018, 06:49:39 PM
Looking for a red steering wheel with the inlay wood grain in the rim 71-76?
Tilt & telescopic, also any parts for 79 Deville's
Steering wheels are impossible to find. The colors were different almost every year. The only 79 part I have is a NOS RH white seat belt guide on the top corner of the seat. Please advise if you need this.
Bob
Quote from: Bob Hoffmann CLC#96 on August 01, 2018, 09:35:40 PM
Steering wheels are impossible to find. The colors were different almost every year. The only 79 part I have is a NOS RH white seat belt guide on the top corner of the seat. Please advise if you need this.
Bob
Thanks Bob, I am good on the seat belt guide, and you are spot on about the rarity of a finding a good steering wheel. If they are in the condition I am looking for they always come with the car attached ;)
Robert
Robert, You're right on the steering wheels!!
I also have a rear license plate & BU light housing marked 79 Deville. It's in nice condition. Do you need it?
Bob
Hello Bob,
I sent a PM to you yesterday. Did you receive it?
Christopher Winter
Hi Chris,
Got it! I'm working on it. Are the fillers you need for bumper to 1/4 panel or bumper the rear body?
Bob
Bob - looking for a set of lower door panels for a 1976 Eldorado Convertible. I expect to recover them to my interior. Also, if possible, the rear panels that go beside the seat. I need both sides.
Thanks so much.
Wade Sanders.
As a side note: I have a pair of rear side panels for a hardtop - 1976 - if you know of someone looking. Need side panels for convertible
Wade,
I have nothing to help you.
Bob
Hello Bob,
I'll send photos tonight when I get home from work. Thanks.
Christopher Winter
Anything for a series 62 2-door convertible? Looking for door glass frames.
Hi,
Looking for a passenger door that is in good shape for a 1957 Cadillac.
Many thanks
Brian
I just listed a referral on your other post.
1976 Cadillac Fuel tank?
No.
hi Bob,
here's my wish list:
antenna (fender mount)
steering wheel
starter
turn signal (or parts)
fan blade
fan belts
heater
spare rim and jack
window handle
that's about it..lol
thanks for looking.
scott
Hi Bob,
1968 DeVille / Fleetwood front hood trim molding the one up front.
1968 RWD Chrome surrounds for both front side marker / cornering lamps
1968 bracket for the heater control valve to attach it to the wheel well. I have a working system but the car didn'e even have a heater control valve when I first got it.
Quote from: Bob Hoffmann CLC#96 on August 02, 2018, 07:15:48 PM
Robert, You're right on the steering wheels!!
I also have a rear license plate & BU light housing marked 79 Deville. It's in nice condition. Do you need it?
Bob
I may I will check, (driving my 75 LeSabre ragtop today) what $$ would you be wanting for it?
Cheers Robert
$45 plus postage. Bob
I'll take it, with two 79's I will need it sooner or later pm me for payment info or email buy@libertywinemerchants.com shipping will be to 98281 Wa. state
Thanks Robert
Quote from: cadillacmike68 on August 13, 2018, 12:22:52 AM
Hi Bob,
1968 DeVille / Fleetwood front hood trim molding the one up front.
1968 RWD Chrome surrounds for both front side marker / cornering lamps
1968 bracket for the heater control valve to attach it to the wheel well. I have a working system but the car didn'e even have a heater control valve when I first got it.
Mike,
I have none of those parts. There's a guy parting a 68 on this board. I suggest you contact him.
Bob
Quote from: scott c. 40 LaSalle on August 12, 2018, 11:21:28 PM
hi Bob,
here's my wish list:
antenna (fender mount)
steering wheel
starter
turn signal (or parts)
fan blade
fan belts
heater
spare rim and jack
window handle
that's about it..lol
thanks for looking.
scott
Scot,
Send that list to bobscads@comcast.net. I have some of those items.
Bob
Quote from: Bob Hoffmann CLC#96 on August 13, 2018, 06:21:15 PM
Mike,
I have none of those parts. There's a guy parting a 68 on this board. I suggest you contact him.
Bob
Bob, Thanks.
I think he has the heater control valve bracket, that's all. Hey it's something.
Bob,
Good morning. Possibly might you have any brake drum/hub or rear end axle parts for a 1940
LaSalle or Cadillac.
I am having an impossible task of removing the right rear drum/hub from my !940 Lasalle without damaging it. I really am looking for the bake drum and hub assembly as I might have to cut mine off to get to the brakes.
Thank you.
Ducylinder Gary
Bob,
I am looking for a 40 lighter please.
Tom
Quote from: ducylinder on August 14, 2018, 12:48:35 PM
Bob,
Good morning. Possibly might you have any brake drum/hub or rear end axle parts for a 1940
LaSalle or Cadillac.
I am having an impossible task of removing the right rear drum/hub from my !940 Lasalle without damaging it. I really am looking for the bake drum and hub assembly as I might have to cut mine off to get to the brakes.
Thank you.
Ducylinder Gary
Don't cut anything! Hopefully Steve Passmore or others experienced with this common problem will see this and help further. The hubs can sometimes be very difficult to get off but it can be done --- patience and the correct tools are key.
Here is a thread about hub/drum removal ---
http://forums.cadillaclasalleclub.org/index.php?topic=126294.msg241582#msg241582
and another ---
http://forums.cadillaclasalleclub.org/index.php?topic=101414.msg112456#msg112456
another ---
http://forums.cadillaclasalleclub.org/index.php?topic=101122.msg112761#msg112761
Quote from: Tom Knoebel on August 14, 2018, 01:58:16 PM
Bob,
I am looking for a 40 lighter please.
Tom
Watch for a email. Bob
Hi Bob,
door handle, rear
heater
antenna
trunk bracket for spare tire
any extra engine components
starter, generator..etc.
Thanks for looking,
scott
Quote from: ducylinder on August 14, 2018, 12:48:35 PM
Bob,
Good morning. Possibly might you have any brake drum/hub or rear end axle parts for a 1940
LaSalle or Cadillac.
I am having an impossible task of removing the right rear drum/hub from my !940 Lasalle without damaging it. I really am looking for the bake drum and hub assembly as I might have to cut mine off to get to the brakes.
Thank you.
Ducylinder Gary
Gary, occasionally there are instances where the taper is really tight and ordinary pullers are not enough to do the job. I have broken the legs off many of the cheap ones. I have a collection of pullers giving up to tens of tons with Auxilary hydraulic screws. I have had my 10-ton puller on a hub, tightening the screw every hour and getting the hub far too hot to touch, after about 4 hours there was a tremendous bang. Remember all the advice about leaving the nut on.
Pictured is my biggest puller. Ex-War dept and has never failed me.
Looking for a aav26 air cleaner. As opposed to carter WDO which is different. For my 40 lasalle.
Bob -
I'm looking for parts for my 1976 Eldo Convt. In particular a pair of red sun visors and an 8-Track player/Radio.
The radio has to be in very good cosmetic shape.
I'm sorry if you mentioned these parts earlier and I missed it.
Thank you,
Alex
Alex,
I don't have those parts.
Bob
Camelot,
I think I contacted you & never got a response. Please contact me directly at bobscads@comcast.net
Thanks, Bob
Any 1954 Coupe Deville parts? Thanks
Hi,
I answered your email directly.
Bob
Any parts that fit 1935? Especially window winder escutcheons.
P
Sorry, no.
Bob
I may have some window winder escutcheons for the 1935 but it will take some searching. I also have a rebuilt temp. gauge and a rebuilt ammeter both with freshly chromed escutcheons done by Instrument Services, Inc. in Machesney Park, IL. https://www.clocksandgauges.com/
I will look for the window winder escutcheons tomorrow (hope I still have them). Let me know if you have any interest in the gauges, the price will be what Instrument Services charged me (have to look that up), not cheap with the chroming but they look as new. :)
Bob- I'm hunting a cruise control transducer for a 1967 Eldorado coupe. Thanks Hugh
Quote from: pmhowe on October 10, 2018, 07:42:30 PM
Any parts that fit 1935? Especially window winder escutcheons.
P
I may have an oil pressure gauge.
Bob
Quote from: pmhowe on October 10, 2018, 07:42:30 PM
Any parts that fit 1935? Especially window winder escutcheons.
P
Quote from: 35-709 on October 10, 2018, 09:43:34 PM
I may have some window winder escutcheons for the 1935 but it will take some searching. I also have a rebuilt temp. gauge and a rebuilt ammeter both with freshly chromed escutcheons done by Instrument Services, Inc. in Machesney Park, IL. https://www.clocksandgauges.com/
I will look for the window winder escutcheons tomorrow (hope I still have them). Let me know if you have any interest in the gauges, the price will be what Instrument Services charged me (have to look that up), not cheap with the chroming but they look as new. :)
???
Found 2 near perfect window winder escutcheons and responded via PM. No answer, guess I'll put them back away, at least I know where they are now --- until I forget again.
Bob,
I need 49 visors in good shape and 49 coupe/convertible door sills. You are also welcome to send a list of whatever 49 parts you have with prices. Never know what may be of interest for the parts cache.
Thanks,
Joe
Hi Bob, for my 'new' 1950 Club Coupe I am in the need of a few Chrome parts. The front fender and door moldings especially which are Chrome and not SS. Possibly the rear bumper guards also. Maybe you have hood and trunk emblems, too? I would need a good starter as well. If you have any good 1950 parts please let me know. Thanks a lot for checking. Best regards, Hans- PS you sold me once hub cups which turned out to be very nice, thanks.
Quote from: Hans1965 on October 22, 2018, 12:58:25 AM
Hi Bob, for my 'new' 1950 Club Coupe I am in the need of a few Chrome parts. The front fender and door moldings especially which are Chrome and not SS. Possibly the rear bumper guards also. Maybe you have hood and trunk emblems, too? I would need a good starter as well. If you have any good 1950 parts please let me know. Thanks a lot for checking. Best regards, Hans- PS you sold me once hub cups which turned out to be very nice, thanks.
Hi Hans,
I have no 1950 parts. If I think of something, I'll advise you. I'm glad you liked the hubcaps.
Thanks, Bob
Quote from: Joe Vastola on October 14, 2018, 08:04:09 PM
Bob,
I need 49 visors in good shape and 49 coupe/convertible door sills. You are also welcome to send a list of whatever 49 parts you have with prices. Never know what may be of interest for the parts cache.
Thanks,
Joe
Joe,
Can you send me some pics of 49 sun visors? please send to bobscads@comcast.net.
Thanks, Bob
Bob,
Im looking for an ignition switch and a glove box lock for a 1965 cadillac sedan deville. Also looking for a trans mount too.
Kevin Olson
Kevin, Sorry I can't help.
Bob
Hi Bob, do you have a 6V starter used from 1950-52? Thanks for checking. Regards, Hans
Bob,
Do you have any 65 parts or can i keep asking for random stuff?
Quote from: Hans1965 on October 30, 2018, 12:43:53 PM
Hi Bob, do you have a 6V starter used from 1950-52? Thanks for checking. Regards, Hans
Hans,
Sorry no starter.
Bob
Quote from: olson187 on November 02, 2018, 12:57:31 AM
Bob,
Do you have any 65 parts or can i keep asking for random stuff?
Probably no 65 parts.
Bob
Do you have any parts for a 57 series 62?
Wayne Newhauser
Probably not. Try Larry at lcamuso@msn.com. If you're looking for 1/4 panel moldings, I know he doesn't have any.
Bob
Do you have any parts for a 1946 cadillac?
Hi John,
Yes I do. Please send your want list to bobscads@comcast.net
Thanks, Bob