Text only | Text with Images

Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Want To Buy - Parts => Topic started by: Mike Baillargeon #15848 on November 07, 2019, 06:33:14 PM

Title: 1968 Fleetwood exhaust bracket (see picture)
Post by: Mike Baillargeon #15848 on November 07, 2019, 06:33:14 PM
I need this 1968 Fleetwood exhaust bracket

wraps the exhaust pipe and then 90 degrees into the hanger.

Mike
Title: Re: 1968 Fleetwood exhaust bracket (see picture)
Post by: Mike Baillargeon #15848 on May 20, 2020, 07:37:27 AM
Still looking for this bracket....

Mike
Title: Re: 1968 Fleetwood exhaust bracket (see picture)
Post by: Chuck Swanson on May 23, 2020, 08:14:19 PM
Hard to find Mike.  I made mine for my '66 with a piece of steel from Tractor supply, and a torch, and a pvc pipe :)  Chuck
Title: Re: 1968 Fleetwood exhaust bracket (see picture)
Post by: Mike Baillargeon #15848 on May 23, 2020, 10:53:56 PM
Chuck do you have a picture of that somewhere?....PVC pipe?

Mike
Title: Re: 1968 Fleetwood exhaust bracket (see picture)
Post by: Chuck Swanson on May 24, 2020, 05:04:44 PM
Quote from: Mike Baillargeon  #15848 on May 23, 2020, 10:53:56 PM
Chuck do you have a picture of that somewhere?....PVC pipe?

Mike

Oh, to clarify, whatever size is your pipe/resonator, buy or just get a piece of pvc the same size.  put the pvc in a vice and bend the metal around the pipe as a template.  Anything with the same diameter can be used to bend the metal into a circle.
Title: Re: 1968 Fleetwood exhaust bracket (see picture)
Post by: Mike Baillargeon #15848 on May 24, 2020, 06:42:21 PM
Ok  got ya...

Thanks Chuck

Mike
Text only | Text with Images