Looking for a right hand side lower control arm for our 41 60 Special.
Jim
Jim,
What's wrong with the one you have? Your photos seem to show two different parts. Or are they 'before' and 'after' photos of the same part?
Jeff
Jeff, they are the same control arm, my son says it has been bent at some time in the past, along whit the weld on the steering knuckle and the sway bar having broken, we think there has been some repairs in he past that were not done properly. He is going to use the control arm, but is thinking he may have some issues during alignment. At this age of parts, this may be the best we will be able to come up with.
He found these two problems during the rebuild of the steering.
We love the car, has new tires, rebuilt the carb, replaced the u-joints, generator/regulator rebuild, engine mounts soon to be replaced. This is a good car, and I thank you for inspecting it for us.
Jim
Jim,
My Master Parts Book shows the lower control arms are the same for all 1940-1949 Cadillacs and LaSalles except he 1940 Series 75 and the 1941-49 commercial chassis models.
They are part #1435824(RH) and 1435825(LH) in Group 1.0010.
The steering knuckles are the same for all 1941-1955 except 47-75 and 55-75 series. Part numbers are 3506432(RH) and 3506433(LH) in Group 1.0170.
This may make your parts search a little easier.
If your still needing one i have them off 46 and 47 series 62. Contact me at dex1244734@yahoo.com
Hi Dex, do you still have this pair of lower control arms?
My spring retainers of a 1941 Coupe 62 are rusted through.
Thanks for your help, Manfred
Thanks to all, I have received the lower control arm.
Jim