Print Page - 1941 Cadillac Series 63 Stromberg Automatic Choke

Title: 1941 Cadillac Series 63 Stromberg Automatic Choke
Post by: J. Russo on January 21, 2021, 07:55:14 AM

I have a question on the Stromberg Carburetor automatic choke and the line that connects to it. Does the opposite end of that line connect to anything? My line does not have a fitting/connection on the opposite end. It's also a homemade line and ends at the front of the engine near the water pump. I don't know if that is correct or not.

Thanks

Title: Re: 1941 Cadillac Series 63 Stromberg Automatic Choke
Post by: wheikkila on January 21, 2021, 09:04:18 AM

Hi John
The tube should run to the exhaust manifold. That is were the heat comes from to operate the choke.
Thanks Wayne

Title: Re: 1941 Cadillac Series 63 Stromberg Automatic Choke
Post by: Ohjai on January 21, 2021, 09:12:09 AM

I hope this picture helps. This is a 41 60 S

Title: Re: 1941 Cadillac Series 63 Stromberg Automatic Choke
Post by: J. Russo on January 21, 2021, 12:13:34 PM

Thanks so much. My exhaust manifold didn't have the metal piece on the side. Fortunately I recently purchased one that has it.

Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => Technical / Authenticity => Topic started by: J. Russo on January 21, 2021, 07:55:14 AM