Cadillac & LaSalle Club Discussion Forum

Cadillac & LaSalle Club Forums => General Discussion => Topic started by: Bill Balkie 24172 on September 03, 2021, 08:24:57 AM

Title: Making parts when you can not find them . Machinist
Post by: Bill Balkie 24172 on September 03, 2021, 08:24:57 AM
Hello ,
    I have been in the machining  business all my life .  This April I will turn 70 and I will be retiring to Florida .  Over the years I have found myself making a lot of parts when they are not readily available. I have a 70 Coupe DeVille and have noticed the the adjustment bracket on the A/C Power Servo were made out of plastic and over the years ( 52 ) these plastic parts have A tendency to get dry and brittle. I have not been able to find them anywhere except in junkyards and even those parts are dry and brittle. This is what I will miss most about retiring is having the opportunity and the capability to re-manufacture parts when needed. It took me about five hours to make this part. Over the years I have made parts for several people never charging them but never making parts to sell for a profit. I feel sad in a way that I will not have the opportunity to do this anymore but in another way I feel happy that I was able to make  many different parts and keep our classic cars running .  Here is a couple of photos of my latest part.
     Bill
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on September 03, 2021, 09:46:25 AM
Bill that is awesome work. I wish that I had become more involved in machining. I did work with plastics a while back on the job. Found many products that would augment various hobbies. Here is a group of 1940s radio knob copies, original was black bakelite, (not pictured), and damaged. I made these copies of a pristine one out of various rigid urethanes. The shiny "aluminum" copy was another grey one like that on the far left, but polished to reveal this luster. Looks like metal & has not dulled in 35 years. Other colors are available. I can see your machining skills plus the addition of this plastic work, with perhaps even some 3D printing further expanding the work that people such as yourself did. Think of the fantastic replacement gear shifter or turn signal levers that could be made for our old Cadillacs? A great combination of new machining and exact repro knobs. Threaded machined inserts could be sunk into the plastic prior to setting, so they could be screwed onto new metal parts. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: walt chomosh #23510 on September 03, 2021, 10:26:39 AM
Bill,
  Rarely does a day go by that I'm not "making" parts for something.....join the club!....walt...tulsa,ok
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on September 03, 2021, 11:20:20 AM
Bill what brand and model of lathe did you use for most of your Cadillac small parts work? Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Bill Balkie 24172 on September 03, 2021, 11:39:52 AM
Lexi and Walt ,
       I have had 3 Classic Cadillac in the past  16 years .    1957 Seville , 1957 Biarritz , 1970 coupe Deville .I honestly do not know how people maintain these cars without having Custom parts Made .  I must of made numerous parts for each car . Convertible top parts , custom bolts , Springs , Brackets , Repaired window parts. Repairing and welding  the aluminum  bumpers for the 57 Eldorado's . ETC. ETC Etc. just to keep the cars road worthy . Fortunatelly the one car that i have now is almost perfect .  Most of the parts i made were for myself however i made several parts for friends . They always offer to pay you for your time .  But truth be told these parts take time .  Some Several hours .  Most people appreciate it and i am happy to help them out .  I look at it this way . You take your everyday driver in to get brakes installed and your lucky to come  out with a bill less then 700 dollars .  The guys uses standared parts and has two hous invested . How do you charge a friend  700 /1000 dollars  For  custom parts made with precision  machinery ?  I don't . I do it because they are my friend .  That is all coming to an end when i move to Florida .
  Bill
Title: Re: Making parts when you can not find them . Machinist
Post by: Bill Balkie 24172 on September 03, 2021, 11:42:07 AM
Hello Lexi ,
    HES lathe 24 inch swing . but most parts were made on a Hardinge tool room lathe . Non Better .

      Bill
Title: Re: Making parts when you can not find them . Machinist
Post by: Jay Friedman on September 03, 2021, 12:03:41 PM
Bill,

I have a vintage (1935) 9 inch South Bend Lathe with a milling attachment that I've owned for 25+ years as well as a modern Taig mini lathe.  I was never a professional machinist like you and what little machining skill I have I learned by taking a night course at a local technical college.  Parts for my 1949 Cadillac are fairly plentiful, so I've never had to make many parts as you have.  Nonetheless, I've made a few small and simple parts for the car as well as some metal parts to replace broken plastic parts on household items. 

I have heard that a Hardinge is the Cadillac of lathes. 

Jay
Title: Re: Making parts when you can not find them . Machinist
Post by: Bill Balkie 24172 on September 03, 2021, 12:21:32 PM
Hello Jay ,
     Looks like you have some nice equipment. And yes the Hardinge Lathe is  the Cadillac of all lathes . But I have to share this with you. Our company was started in 1937 shortly after that we purchased the southbend  9 inch lathe in 1941 . ( Before i was Born ) similar to yours but without a milling attachment. Some years ago we decided to chrome plate this Lathe and keep it for show in our office . At one time it was the backbone of our shop. Now loaded with five Axis   milling centers numerous CNC machines the South Bend still has a place in our at our shop .
       Bill
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on September 03, 2021, 12:49:18 PM
Bill thanks. Don't you just love fine tools? Thanks for sharing. Once I had to turn a wooden "bearing" for my '56 Caddy's throttle linkage at the firewall. The sleeved rubber grommet bearing was not available. So I chose the hardest wood I had here, (elm), turned it on my General wood lathe, soaked it in grease, and installed it. Ran fine for 3 years until I found an actual replacement. I remember making wooden blanks for my Father's old clock repair business and knew that some antique clocks had wooden movements. So I figured why not do the same for the Caddy. Ran well, but would have loved to have one of those Hardinge lathes and work one in metal. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Bill Balkie 24172 on September 03, 2021, 01:23:26 PM
Quote from: walt chomosh #23510 on September 03, 2021, 10:26:39 AM
Bill,
  Rarely does a day go by that I'm not "making" parts for something.....join the club!....walt...tulsa,ok
Hello Walt ,
  Your Car and what looks like a Airstream are Beautiful . Is that a recent Picture ? Or is that some 60 years ago ?

   Absolutely  Beautiful ,
          Bill
Title: Re: Making parts when you can not find them . Machinist
Post by: The Tassie Devil(le) on September 03, 2021, 10:38:52 PM
G'day Bill,

Welcome to the world of retirement, or as I put it, Getting a Life.

Does this move to Florida mean that you are moving into a place that has a huge restriction on having and using power tools?   If so, then that sucks.

In my little Garage/workshop I have a vast array of power tools, and have been making my own special tools, especially after I left work, as I used to use the tools available there.   Re-supplying my aforementioned tools cost a bit, but really worth it.

Bruce. >:D

PS.   I am self-taught in the metal work department, and virtually everything else, but I was a Shipwright by trade.   Working mostly with wood.   Metal work got farmed out.
Title: Re: Making parts when you can not find them . Machinist
Post by: Ralph Messina CLC 4937 on September 04, 2021, 12:13:04 AM
Bill,

There's no reason you can't set up a small shop to indulge your passion. Hell, Roger Zimmerman has been building whole cars in his spare time: http://forums.cadillaclasalleclub.org/index.php?topic=156394.0

Sunshine, cars and a shop .......sounds like heaven

Title: Re: Making parts when you can not find them . Machinist
Post by: Roger Zimmermann on September 04, 2021, 03:54:58 AM
I would love to have the same (or similar) machines like Bill has. Unfortunately, my flat is too small and at 76 years old it's out of question to buy a house or a shop! What I'm doing with my small lathe/milling machine is just good for small parts; I would also love to modify the air cleaners from my Brougham and Biarritz, but I can't!
I did once with my small lathe a spacer going between the crankshaft and transmission; I had also hours to machine it because small machine = small quantity of metal cut in one pass...All that for maybe $ 20.00 as selling price!
Bill, if you intend to have a small lathe for small parts, I can recommend the Sherline products; you probably know that brand.

Edit: About radio knobs: a guy from Switzerland/Netherland restoring a '57 Brougham was missing his radio knobs. He asked if I would reproduce them, which I did. A lot of work again, but the end product, once chromed, was very near from the original knob (the one which is chromed on the pictures).
Title: Re: Making parts when you can not find them . Machinist
Post by: Ohjai on September 04, 2021, 09:22:11 AM
Quote from: lexi on September 03, 2021, 12:49:18 PM
"knew that some antique clocks had wooden movements".  Clay/Lexi


John Harrison made the first Chronometer in 1713 with the gears made of wood.  This clock is still running and on display at the Science Museum in Greenwich England. This is the invention that solve the problem of finding ones longitude at sea.


Jim
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on September 04, 2021, 09:51:22 AM
Roger, as usual your work is superb. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Roger Zimmermann on September 04, 2021, 11:42:22 AM
Thanks Clay!
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on September 04, 2021, 01:37:38 PM
Quote from: Ohjai on September 04, 2021, 09:22:11 AM

John Harrison made the first Chronometer in 1713 with the gears made of wood.  This clock is still running and on display at the Science Museum in Greenwich England. This is the invention that solve the problem of finding ones longitude at sea.

Jim

The wooden geared clocks we worked on had brass escapements. That is a high wear part compared to the other wheels. So I suppose they had to be made from a more robust material. The other slower moving wheels were wooden and usually showed little signs of wear, even well after 100 years. The wooden bearing I made for my Cadillac's throttle linkage also showed no wear after 3 years of use, after I replaced it with an original. Again, that was a part that was not subjected to high wear. For parts like that the main concerns would be what kind of wood is used, was it cut quickly after being felled and was it properly dried to hopefully to eliminate seasoning checking. Speaking of wood, once I got into my '56 Caddy's interior I was surprised to see how much wood was used in the construction of the arm balusters (with possible steam bending) and rear window frame. Add wood working to the skills subset necessary for restoration work on old cars. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Bill Balkie 24172 on September 05, 2021, 06:10:05 PM
Hello Guys ,
   My whole purpose of retirement is not to have machinery in my Garage .  I want to start a complete new chapter in my life .  I plan on having my 1970 Cadillac and enjoying it for the rest of my life .  But no more machining . Everybody is different  but that is the way I feel . It's time for me my wife and my Grandchildren .  But then again never say never .

      Bill
Title: Re: Making parts when you can not find them . Machinist
Post by: Jay Friedman on September 05, 2021, 06:30:40 PM
Quote from: Ohjai on September 04, 2021, 09:22:11 AM

John Harrison made the first Chronometer in 1713 with the gears made of wood.  This clock is still running and on display at the Science Museum in Greenwich England. This is the invention that solve the problem of finding ones longitude at sea.


Jim

The wooden parts in John Harrison's clocks were made of oak and lignum vitae, the latter being a very dense wood which also has a natural lubricant in the wood itself.  Harrison tried to avoid having to use oil or grease as lubricants.  He did all this before the invention of modern machine tools: screw-cutting lathes and milling machines.  His fascinating story is recounted in a great book by Dava Sobel, Longitude: The True Story of a Lone Genius Who Solved the Greatest Scientific Problem of His Time. 
Title: Re: Making parts when you can not find them . Machinist
Post by: Ohjai on September 05, 2021, 08:43:10 PM
Dava Sobel's book "Longitude" is fantastic.  I have read it several time, and given many copies away,  especially to young people interested in science.  A very easy book to read and understand.  It took the mystery of how longitude is determined.


Jim
Title: Re: Making parts when you can not find them . Machinist
Post by: James Landi on September 07, 2021, 07:18:08 AM
Bill,

I "get" the entire life change... for me, the transition was difficult, having been a "school man" for 50 years, and having tried retirement on 4 occasions, and then "getting the bug again," and going back to it.  The last opportunity was to head a lovely Episcopal school in Florida, and I changed my mind in the final stages of the search... and thank GOD I did--- now, at age 75, I'm enjoying life at a slower pace, but I still  very much enjoy getting my hands dirty with various auto and home and boat projects.   You clearly have a fabulous talent, developed over decades of experience, and you might consider taking on jobs where the pay for service goes to your grandkids' education, an approach for pay for service that would likely sit well with many of us. The average hourly for work on a car exceeds $100 an hour, and quite often, as you well know, one pays for unnecessary errors.    Just a thought Bill, respectfully,   James   
Title: Re: Making parts when you can not find them . Machinist
Post by: Jay Friedman on September 08, 2021, 03:34:43 PM
John Harrison's 4 maritime chronometers H1, H2, H3 and H4 described in Sobel's book are on display at the Royal Observatory, Greenwich, London. 

https://www.rmg.co.uk/royal-observatory/attractions/john-harrisons-marine-timekeepers

There you can see them working perfectly after 200+ years, though they did undergo a restoration in the 1920s. 
Title: Re: Making parts when you can not find them . Machinist
Post by: Scot Minesinger on September 09, 2021, 12:20:32 AM
I probably will always be making custom parts.  The part you made for your 1970 Cadillac is way better quality than it ever needed to be, and if every part was made with that type of durability all the 1970 Cadillacs would still be in use today. 

Will be retiring soon, and looking forward to getting a life.  It will be more doing what I want when I want. 
Title: Re: Making parts when you can not find them . Machinist
Post by: dochawk on September 20, 2021, 06:31:00 PM
Quote from: Bill Balkie 24172 on September 03, 2021, 08:24:57 AM
Hello ,
    I have been in the machining  business all my life .  This April I will turn 70 and I will be retiring to Florida .  Over the years I have found myself making a lot of parts when they are not readily available. I have a 70 Coupe DeVille and have noticed the the adjustment bracket on the A/C Power Servo were made out of plastic and over the years ( 52 ) these plastic parts have A tendency to get dry and brittle. I have not been able to find them anywhere except in junkyards and even those parts are dry and brittle. This is what I will miss most about retiring is having the opportunity and the capability to re-manufacture parts when needed. It took me about five hours to make this part. Over the years I have made parts for several people never charging them but never making parts to sell for a profit. I feel sad in a way that I will not have the opportunity to do this anymore but in another way I feel happy that I was able to make  many different parts and keep our classic cars running .  Here is a couple of photos of my latest part.
     Bill
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on May 19, 2024, 11:10:50 PM
Quote from: Jay Friedman on September 03, 2021, 12:03:41 PMBill,

I have a vintage (1935) 9 inch South Bend Lathe with a milling attachment that I've owned for 25+ years as well as a modern Taig mini lathe.  I was never a professional machinist like you and what little machining skill I have I learned by taking a night course at a local technical college.  Parts for my 1949 Cadillac are fairly plentiful, so I've never had to make many parts as you have.  Nonetheless, I've made a few small and simple parts for the car as well as some metal parts to replace broken plastic parts on household items. 

I have heard that a Hardinge is the Cadillac of lathes. 

Jay

Well. I took the plunge and bought a vintage South Bend Model A machinist's lathe. Already I am wondering how I got along without one for so long. Between that, my industrial metal cutter and my MIG welder, as well as other tooling, I have lots of projects on the go including some Cadillac. For the hardcore out there, many will eventually have the need to make some parts and even the occassional tool to keep our Caddies on the road. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Jay Friedman on May 20, 2024, 09:54:14 AM
Clay/Lexi, congratulations on your "new" lathe.  If you haven't already, you might want to buy "How To Run A Lathe", a vintage instruction manual by South Bend.  You can find them on ebay and elsewhere.

Mine is an early Workshop Model C, with different pick off gears for rough and fine cuts, as well as screw cutting. There is even a separate pick off gear to reverse the carriage.  I have lots of tooling, but wish I had a gear box like your Model A. 

I had a bit of adventure with mine. Until 2007 or so the South Bend factory was still in business and in 2004 the Grand National was in South Bend. I took my lathe apart, loaded it into the space between the front and back seats of my '49 Cad, drove to South Bend and delivered the lathe to the factory. One of their machinists "re-scraped" (is that the right term?) the bed and lined up the headstock and tail stock. A month later they shipped it back to me in a crate.  I have a photo of my '49 inside the factory.  Don't know how to post them here, though.
 
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on May 20, 2024, 10:11:05 AM
Quote from: Jay Friedman on May 20, 2024, 09:54:14 AMClay/Lexi, congratulations on your "new" lathe.  If you haven't already, you might want to buy "How To Run A Lathe", a vintage instruction manual by South Bend.  You can find them on ebay and elsewhere.

Mine is an early Workshop Model C, with different pick off gears for rough and fine cuts, as well as screw cutting. There is even a separate pick off gear to reverse the carriage.  I have lots of tooling, but wish I had a gear box like your Model A. 

I had a bit of adventure with mine. Until 2007 or so the South Bend factory was still in business and in 2004 the Grand National was in South Bend. I took my lathe apart, loaded it into the space between the front and back seats of my '49 Cad, drove to South Bend and delivered the lathe to the factory. One of their machinists "re-scraped" (is that the right term?) the bed and lined up the headstock and tail stock. A month later they shipped it back to me in a crate.  I have a photo of my '49 inside the factory.  Don't know how to post them here, though.
 

Great story Jay. I would have loved to see the South Bend plant. And yes, I believe you are correct with that term "scraped", used to re-finish the bed. I think Grizzly now owns South Bend tools and am told they still offer some parts. Getting that lathe into your Cadillac must have been a sight to see. These lathes are beasts. Mine came without the stand which was a problem as it is not the "underneath" model, so I had to find a suitable stand and modify it. Big job. Used my engine hoist with straps to move the lathe onto the stand. Thanks for the tip on the book, which I did purchase. Have the re-print but decided to pick up an original 1930s copy as it was better illustrated than the later edition, odd as that seems. Between the South Bend and my old General wood lathe, let the chips fly. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Jay Friedman on May 20, 2024, 01:50:16 PM
I also have both a re-print and an original copy of the instruction book. Another good book is "Basic Maintenance for the Vintage South Bend Lathe" which are sold on Amazon.

My 9 incher comes apart. (Don't know about a Model A with a gearbox.)  I unbolted the headstock and took apart the carriage with not much difficulty and lifted them off.  The tailstock, gear carrier and the leadscrew, of course, came off simply and easily.  Once these are removed along with the strap from the motor, the bed becomes much lighter in weight and when unbolted from the table my wife and I were able to manhandle it into the car. The headstock and tailstock went in easily too.  When I got to the factory in South Bend, the employees were so taken aback by my vintage car with the lathe in it that several lent a hand to unload it.  Now this was along with all the tools and spare parts that I take on long trips to GNs. As they say, "Blue chips".   

Mine is not an "underneath" model either.  I bought a South Bend table for an underneath drive model which, like you, I modified.  I stopped up the holes on the tabletop with steel plates and mounted the lathe on them.  I made a stand for the motor from a Chinese bench grinder stand which is fastened behind the table with steel straps.  Send me an email to jaysfriedman(at)yahoo.com and I'll reply with a photo of it all.
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on May 20, 2024, 03:13:24 PM
Will do, and I will send a photo of my set up. I used a double pedastal style table that I fastened steel wheel locking casters to, onto thick angle iron, so I can move it around the shop without flex, then lock it into place so it won't roll. No rubber on the casters, just steel, so they won't mush out under the weight which total now with the cabinets loaded is around 700 to 750 lbs. I also installed a custom steel chip tray which further stiffens the entire assembly. Like you I used steel plate to further secure the motor, (5/8" thick I used), as the 1/4" inch plate I initially installed was flexing. Not aware of that other book you mentioned. Will have to look that one up. I did pick up "A Guide to Renovating the South Bend Lathe 9" Model A, B & C Plus Model 10K". Helps fill in the gaps. How useful is your milling attachment? Thinking of looking for one. I do have a riser kit for mine, which when installed will increase the swing to 11" (or 11.5-can't remember exactly). Adding to the quick change tool holder which is better than the original lantern style. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Jay Friedman on May 20, 2024, 05:23:18 PM
My table has little steel tabs with bolt holes at floor level. Into those I installed permanent steel "feet" which in turn sit on small rubber pads to protect the garage floor. I think (hope?) it's all stiff enough.  I check the balance and twist every so often with a machinist's level.  My chip tray is just a sheet metal pan.

My steel plates under the table top holes are 1/4" thick. Where did you obtain the 5/8" plates?  I have a copy of "A Guide.....". The book I mentioned is published by the same people.  My milling attachment is useful for small jobs.  It has its limitations, of course. 

I have several types of tool holders, including a lantern and one I made myself, but not a quick-change. My favorite tool holder is The Diamond Tool Holder made in Australia. It sits vertically like very early lathes and it's easy to grind tools for it using an included jig. (I'm not good at grinding tools.) I have a larger one for my South Bend and a smaller one for my Taig. 

https://www.eccentricengineering.com.au/products/diamond-tool-holder/the-diamond-tool-holder
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on May 20, 2024, 10:41:03 PM
Jay I just sent you some photos. The 5/8" thick steel plate I bought at a local metal supplier up here called The Metal Supermarket. A great place to shop for most if not all of your metal needs. The staff were kind enough to cut it to size for me. I drilled the 5/8ths at home on the drill press to accept the mounting hardware and to attach it to the lathe stand. There is a shot of it that I sent you. Have heard of the Diamond Tool Holder, will have to look into that as well. Thanks for the tip. Have been buying some ancilliary tools for the lathe which has already done some jobs for me. Not in your league as a steep learning curve lies ahead of me. I have a couple of tool grinding stations here that I use for the wood lathe chisels. Will probably have one sub for the SB cutters, while some are just throw aways-the turning inserts. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Stefan Bartelski (CLC Webmaster) on May 21, 2024, 02:57:28 PM
Quote from: Lexi on September 03, 2021, 09:46:25 AMBill that is awesome work. I wish that I had become more involved in machining. I did work with plastics a while back on the job. Found many products that would augment various hobbies. Here is a group of 1940s radio knob copies, original was black bakelite, (not pictured), and damaged. I made these copies of a pristine one out of various rigid urethanes. The shiny "aluminum" copy was another grey one like that on the far left, but polished to reveal this luster. Looks like metal & has not dulled in 35 years. Other colors are available. I can see your machining skills plus the addition of this plastic work, with perhaps even some 3D printing further expanding the work that people such as yourself did. Think of the fantastic replacement gear shifter or turn signal levers that could be made for our old Cadillacs? A great combination of new machining and exact repro knobs. Threaded machined inserts could be sunk into the plastic prior to setting, so they could be screwed onto new metal parts. Clay/Lexi
Nowadays, with 3d printing, it is amazing how relatively easy it is to reproduce old parts, not only in plastic but in nylon, even metal. All it takes is some knowledge of 3d CAD programs. Even if you do not have a 3d printer, there a services where you can send your 3d files and have them printed. Costs are often quite reasonable, and lower than having something machined. Obviously, not all parts can be made this way, but if they can use 3d printing to create rockets and rocket engines, A Cadillac part should not be too difficult.
Title: Re: Making parts when you can not find them . Machinist
Post by: Lexi on May 21, 2024, 04:06:12 PM
Yes, that is the way to go Stefan, and that technology will only improve in the future. I have a CNC machine, but not a printer, so between the CNC and the other metal working tools here, hopefully I'm good to go with most small jobs-if I have to manufacture. I also have a molding and casting shop here as well. I am used to fabricating stuff which works well for me. Below is a handle I just made from scratch on my vintage engine lathe, including the knurled and chamfered areas, and stepped drilled pockets inside (not visible in the photo), as a replacement knob for a tool that was broken. And yes, a tool I have often used when working on my Caddy.

What was it? A tool called a "Lab Jack". These are miniature scissors activated lifts often encountered in Forensic labs and other Scientific work spaces, hence my exposure to them years ago when I worked as a Forensic Scientist. Beware the light duty ones. What you want is the heavy duty type which in some cases can tolerate up to 200 lb lift capacity, usually with a work surface of 7" x 6". I got a pair of heavy duty steel ones, which came in handy when I had to support my lathe during mounting. At around 400 lbs it destroyed the 2.5 inch plastic hand wheel when the lathe tipped. The jack however, survived. This steel fabed handle below is my replacement for the broken plastic hand wheel. Good news is that I saved a tool. These are like having a third hand, or in my case, a 4th. I would trust them used in tandem to support a Cadillac bumper for example, and with the short lift increments employed through the lead screw, you can easily line up holes, etc. Sometimes the wife just isn't around (or can't be found) to help out. No more hunting around for the right amount of scrap blocks of wood to support something...

Aside from the manufacture of parts, the fabricating of, and/or their repair can be just as important and timely for us CLC'ers. Especially as Cadillac stuff is more obscure or unobtainable. The Administrators should consider opening a new category in the Forum for "Fabrication & Repair", when members have a Cadillac related project which required special tools and/or fabricating. Yes, is Technical related, but a case could probably be made to warrant it's own folder. Clay/Lexi
Title: Re: Making parts when you can not find them . Machinist
Post by: Jay Friedman on May 21, 2024, 06:41:04 PM
That is good work, Clay.