Hello All,
Anybody out there know of a supplier for the rubber boot/duct that goes from the heater blower to the heater box on the firewall for non-air cars? Im looking for something close to the original, not a hard plastic one.
Thanks to all that reply, Steve
USA Auto parts
Gday Steve,
What I used on mine is a cut up inner tube and wrapped that around. Put the overlapping join to the back after you have joined it with some contact cement.
Worked a treat.
And, if the inner tube has a couple of mends in it, all the better. Hate cutting up a new tube. Plus, you are left with pieces of rubber that can be used elswear in the workshop.
Bruce,
The Tassie Devil(le),
60 CDV