1956 Series 62 duel Carburators

[silverbullet07]

We have just restored a 56 Convertible and I am trying to find photos of how the throttle return spring is set up on the duel carb setup. The throttle bracket in firewall has a spring but not strong enough to return the throttle arm. I was wondering if there are additional return spring on front somewhere.

Any photos would be helpful

Thank You

[silverbullet07]

Still needing photos if someone can help.

[V63]

There is a 56 biarritz survivors roster, they should be of help to you.

[johnregrus]

The photos attached are mine from my 56. Not the greatest photo's because of the air cleaner being installed. Hope they help.

[Mike Josephic CLC #3877]

I have "the book" on adjusting the dual Rochester carbs
for 1955.  Yours are Carters, but I believe the linkage
and set up should be similar.  Here's what it shows:

[Roger Zimmermann]

There are some major differences between 1955 and 1956 as you can see on the picture.
I'm 100% sure that the return spring is not correct. When located outside of the US, you have sometimes to be creative!

[silverbullet07]

Thanks everyone for the help.