bottle

[Dave Ventresca]

I need for a 58 , a washer bottle top only (I have the glass jar) with the plastic piece with 4 nipples. and a good used engine dipstick, which as I understand is one year only.thanx, Dave

[Dan LeBlanc]

I believe McVeys still sells the lids with the fittings.

[Grant Owen]

Hi Dave, Mcveys do sell the lids & repair kits which have rivets with them if you don't have the rivet tools you can use a ball bearing & press.
Use a ball bearing that is bigger that the ID of the rivet tube it can be difficult if you haven't done this type of thing before. (don't use a to small ball bearing as you may get it stuck in the rivet)
The Mcveys Lids tend to rust very quickly & they don't sell the Plastic with the tubes.
You are far better off looking for a NOS lid they are used on many GM & other makes for the same years it was a common Trico part, I have managed to buy 4 NOS lids with jars over the past 2 years from the States & I live in New Zealand & the Jars with lids cost me less than $100 each.
I hope this helps.

[Dave Ventresca]

thanks for the tips everyone on the bottle. any leads on a dipstick?thanx,  Dave

[R Schroeder]

This guy claims to have parts.

http://www.ebay.com/itm/1956-1958-Cadillac-Windshield-Washer-Bottle-Top-Lid-/221195594839?pt=Vintage_Car_Truck_Parts_Accessories&fits=Year%3A1958%7CMake%3ACadillac&hash=item338048ec57&vxp=mtr