WTB - 1941 60 Special (6019) Rear Window & Trim

[Paul Phillips]

The time has come to do some major paint renovation on my 1941 60 Special.  The car was modified many years ago to a 'limo' top with vinyl and a smaller rear window mounted in a wooden plug that was installed in the original opening.  The top needs to be redone to keep it, but this is also an opportune time to go back to original look, if the parts are available. 

Need the 3 glass sections, inner and outer garnish trim, and inner and outer divider bar trim.  Screws would be a nice bonus.  Steele has the rubber parts, so that is not as critical. 

Please advise if you can help.

Thanks!
Paul

[gary griffin]

There is one rear window with bolt holes for the trim that divides the window into 3 sections I believe.

[Paul Phillips]

Additional info - thanks to some of the experts out there in the vendor community - this is a 3 piece glass assembly where the divider bars are functional, as opposed to the Fisher bodied cars, which have the single piece glass, as Gary suggests.  Apparently Fleetwood did this on the 38-41 60 Specials, and it appears that it is the same set of parts over the year range.

[Bob Hoffmann CLC#96]

Steve,
I just checked my MBPB again. The ONLY 3 piece glass in that era was the 38 to 41 60S. I don't want to rehash the Fisher versus Fleetwood debate. Sufice to say there were LOTS of mistakes in Mc Calls book.
HTH, Bob

[markcapen]

I have the outer frame and the inner trim but not able to find the two devider pices if you are interested

[Paul Phillips]

Mark
Sorry - I missed your message until today.  Could you please PM me with details on what you have & asking price.

Thanks!

[markcapen]

Not sure if you are still looking for parts because this post is a couple of month old let me know if you are

thanks
Mark

[Paul Phillips]

Mark
In the time since March 2012 I found another source for these parts, so no longer area need. Thanks.
Paul