News:

Please note that, while reinstating users, I have noticed that a significant majority have not yet entered a Security (Secret) Question & Answer in their forum profile. This is necessary for a self-service (quick) password reset, if needed in the future. Please add the Q&A in your profile as soon as possible

Main Menu

1952 wiper motor upgrade

Started by Rdtreur, February 04, 2022, 05:18:29 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Rdtreur

I changed my wiper motor from the old trico vacuum unit to a modern two speed electric motor. I did not want to pay the $280,- plus shipping & tax to the Netherlands for the "Newport" set-up so I used a Vetus marine application which is in many ways adjustable. With some fabrication work this unit is a very good solution for many trico swaps!
I hope this is useful for some of you guys that run in the same issues.
Here are some photo's of my setup:

R.D. Treur
Past caddy’s:
‘68 convertible ‘70 Eldorado,  ‘75 sedan, ‘75 Fleetwood

The Tassie Devil(le)

Looking good, and if you really wanted to sort of camouflage it, you could strip the guts out of the original diecast case, and trim it so it simply covers the new unit as much as possible.

Did you convert the actuating control to operate the unit?

Bruce. >:D
'72 Eldorado Convertible (LHD)
'70 Ranchero Squire (RHD)
'74 Chris Craft Gull Wing (SH)
'02 VX Series II Holden Commodore SS Sedan
(Past President Modified Chapter)

Past Cars of significance - to me
1935 Ford 3 Window Coupe
1936 Ford 5 Window Coupe
1937 Chevrolet Sports Coupe
1955 Chevrolet Convertible
1959 Ford Fairlane Ranch Wagon
1960 Cadillac CDV
1972 Cadillac Eldorado Coupe

Rdtreur

Quote from: The Tassie Devil(le) on February 04, 2022, 07:00:32 PM


Did you convert the actuating control to operate the unit?

Bruce. >:D

No, I just took the old switch/actuating out and put the new vetus switch in, took the plastic knob off and placed the original knob on the vetus switch
R.D. Treur
Past caddy’s:
‘68 convertible ‘70 Eldorado,  ‘75 sedan, ‘75 Fleetwood

J. Gomez

Ramon,

Real good alternative conversion you made, the motor looks very close to the one used in the Newport brand.  ;)

At least you recess it to fit the cavity and the most important not to interfere with the air filter housing. One of the problem with the Newport one which does fits fine is the way the motor bracket is place, it tilts the motor down which blocks the air filter housing to seat flat on the carb.

I had to cut my bracket and re-fit it back to make it vertically (similar to what you have done in yours) to clear the air filter end.

Good reversed engineering..!   8)
J. Gomez
CLC #23082

Technician!

Quote from: Rdtreur on February 04, 2022, 05:18:29 PM
I changed my wiper motor from the old trico vacuum unit to a modern two speed electric motor. I did not want to pay the $280,- plus shipping & tax to the Netherlands for the "Newport" set-up so I used a Vetus marine application which is in many ways adjustable. With some fabrication work this unit is a very good solution for many trico swaps!
I hope this is useful for some of you guys that run in the same issues.
Here are some photo's of my setup:

Most excellent and very resourceful!!!!
Perfection bordering insanity