Set of Four (4) 1957-58 41098 Sabre Wheels with Two (2) Original Caps

[James427]

Up for sale is a VERY rare set of 1958 Cadillac Sabre Wheels. Most Sabre wheels produced by Cadillac are of the smaller inner wheel diameter that will NOT fit on 1957 and later 5x5 bolt pattern GM cars without spacers. ONLY the 41098 wheels WILL fit 1957 and up Cadillac cars. The early wheels will not fit over the 1957 and later larger brake drums. Full sets of these wheels are very hard to come by (just read the Hemmings Motor News Article in the link below). I will sell the entire set with two (2) original center caps for $1,575. They are in driver quality condition but are excellent cores for restoration. Wheels are located in the Tampa Area. Will ship at your cost.

Part number for the 1955 Sabres are as follows,
• # 38612 (stamped on wheel hub)
Part number for the 1956 Sabres are as follows,
(# stamped on wheel hub)
• # 39786 Chrome Finish
• # 39787 Chrome Finish Series 75
• # 39796 Gold Finish
• # 39797 Gold Finish Series 75
Part number for the 1957-58 Sabres are as follows,
(# stamped on wheel hub)
• # 41098 Chrome only (VERY RARE!) THESE FOUR WHEELS ARE THE 41098 WHEELS.


Quote From Hemmings Motor News Article "Mark Senatore, told us, "The 1957 and 1958 wheels are by far the rarest, nearly impossible to find, and very expensive to find as a set." Here at Hemmings, we've seen costs that can lead to spending close to $1,000 for a salvageable saber wheel"

https://www.hemmings.com/stories/article/fins-fins-fins