News:

Please note that, while reinstating users, I have noticed that a significant majority have not yet entered a Security (Secret) Question & Answer in their forum profile. This is necessary for a self-service (quick) password reset, if needed in the future. Please add the Q&A in your profile as soon as possible

Main Menu

Fuel Pump Block-Off Plate 52 Cadillac 390 engine

Started by eureka rick, November 28, 2023, 10:29:26 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

eureka rick

November 28, 2023, 10:29:26 PM
Anyone know where I can get a Fuel Pump Block-Off Plate 52 Cadillac 390 engine
Will Mr Gasket 1516 fit?

Thanks

The Tassie Devil(le)

#1
November 29, 2023, 12:57:47 AM
Make one.

I made one when I converted my car to PCV, and ran an electric pump.

Got a piece of steel (Could have used Aluminium) and cut to shape, and used the gasket that was used for the Fuel Pump.

As I wasn't running the fuel pump, I removed the pushrod to keep it from bouncing around.

Bruce. >:D
'72 Eldorado Convertible (LHD)
'70 Ranchero Squire (RHD)
'74 Chris Craft Gull Wing (SH)
'02 VX Series II Holden Commodore SS Sedan
(Past President Modified Chapter)

Past Cars of significance - to me
1935 Ford 3 Window Coupe
1936 Ford 5 Window Coupe
1937 Chevrolet Sports Coupe
1955 Chevrolet Convertible
1959 Ford Fairlane Ranch Wagon
1960 Cadillac CDV
1972 Cadillac Eldorado Coupe

dn010

#2
November 29, 2023, 12:36:12 PM
Agreed with the above although I didn't convert to PCV. I cut mine down from sheet steel, shaped it, drilled two holes and was done with it - took all of 10 minutes.

-----Dan B.
'57 Cadillac Sedan Deville 6239DX
'81 DMC DeLorean
Print
Go Up Pages1
User actions