News:

DARK MODE THEME OPTION AVAILABLE - A user selectable Dark Mode theme and some other layout themes with color choices have been installed and are now available for all forum participants. For instructions, please see the post in the General Discussion Forum. To keep the current Light Mode theme, no action is necessary.

Main Menu

Carter WCD 595s Float Level

Started by Art Cutler, April 08, 2024, 08:14:37 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Art Cutler

April 08, 2024, 08:14:37 PM
I'm rebuilding a Carter WCD model 595s carburetor for my '41 Series 62 Coupe (originally had Cater WDO).  I believe these were an option from '46-'49.  I don't have a service manual for these years.  Does anyone know the correct float level setting for this carburetor.  I have Carter tools T109-160 (9/64") and T109-162 (3/16").  I'm hoping one of these is correct.
Thanks!
Art Cutler
Series62, CLC #15689

V63

#1
April 08, 2024, 11:54:41 PM
One thing to keep in mind that these original measurements were not considering alcohol blended fuels.

The rule of thumb was the float was effectively parallel to the carb housing.

 With blended fuel I would adjust the float slightly lower than that to get the level where it needs to be.
Print
Go Up Pages1
User actions