News:

Please note that, while reinstating users, I have noticed that a significant majority have not yet entered a Security (Secret) Question & Answer in their forum profile. This is necessary for a self-service (quick) password reset, if needed in the future. Please add the Q&A in your profile as soon as possible

Main Menu

In need of brake line brackets(see pics)1956 Caddy 6219X

Started by RayRay, January 08, 2019, 10:08:17 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RayRay

I need driver and passenger side brake line brackets. A good pic of routing would be nice too.  :) thanks

35-709

In your second picture, the red wire that runs inside that clamp --- please wrap it with something, or slip a piece of small hose over it to protect it from chafing, or find somewhere else to hold it in place.  What I see is really not a good idea.
There is a fine line between "Hobby" and "Mental Illness".  Dave Barry.   I walk that line.
1935 Cadillac Sedan resto-mod "Big Red"
1973 Cadillac Caribou - now back home as of 9/2024
1950 Jaguar Mark V Saloon resto-mod - Sold
1942 Cadillac 6269 - Sold
1968 Pontiac Bonneville Convertible - Sold
1950 Packard 2dr. Club Sedan
1935 Glenn Pray - Auburn Boattail Speedster, Gen. 2

M. Bankes

Hi,
I believe I have them, I can take them off the car tomorrow if you'd like, $ 25 for the pair
Let me know, you can e-mail me at faded.fins@yahoo.ca
Michael

RayRay

Quote from: 35-709 on January 08, 2019, 01:52:53 PM
In your second picture, the red wire that runs inside that clamp --- please wrap it with something, or slip a piece of small hose over it to protect it from chafing, or find somewhere else to hold it in place.  What I see is really not a good idea.

Yeah I know, I acquired this project in the state that it's in and there's quite a few things that need attention. I've already found a handful of issues put together incorrectly. They pretty much just installed the drivetrain ran all the brake and fuel lines and I got it right after they put the body on it so the only thing I've gotten to so far is the wiring, I installed the dash and now I'm working on going over everything with a fine tooth comb and noticing brackets and linkages missing.
   Thanks for the insight though!

RayRay

Quote from: M. Bankes on January 08, 2019, 07:21:34 PM
Hi,
I believe I have them, I can take them off the car tomorrow if you'd like, $ 25 for the pair
Let me know, you can e-mail me at faded.fins@yahoo.ca
Michael

I would love to get them, any way you can take a picture of both sides before you remove them and send that as well? Im trying to get a reference for line routing and a visual of the engine bay overall. Let me know what the total is with shipping and I'll PayPal it right over. Thank you!