I need driver and passenger side brake line brackets. A good pic of routing would be nice too. :) thanks
In your second picture, the red wire that runs inside that clamp --- please wrap it with something, or slip a piece of small hose over it to protect it from chafing, or find somewhere else to hold it in place. What I see is really not a good idea.
Hi,
I believe I have them, I can take them off the car tomorrow if you'd like, $ 25 for the pair
Let me know, you can e-mail me at faded.fins@yahoo.ca
Michael
Quote from: 35-709 on January 08, 2019, 01:52:53 PM
In your second picture, the red wire that runs inside that clamp --- please wrap it with something, or slip a piece of small hose over it to protect it from chafing, or find somewhere else to hold it in place. What I see is really not a good idea.
Yeah I know, I acquired this project in the state that it's in and there's quite a few things that need attention. I've already found a handful of issues put together incorrectly. They pretty much just installed the drivetrain ran all the brake and fuel lines and I got it right after they put the body on it so the only thing I've gotten to so far is the wiring, I installed the dash and now I'm working on going over everything with a fine tooth comb and noticing brackets and linkages missing.
Thanks for the insight though!
Quote from: M. Bankes on January 08, 2019, 07:21:34 PM
Hi,
I believe I have them, I can take them off the car tomorrow if you'd like, $ 25 for the pair
Let me know, you can e-mail me at faded.fins@yahoo.ca
Michael
I would love to get them, any way you can take a picture of both sides before you remove them and send that as well? Im trying to get a reference for line routing and a visual of the engine bay overall. Let me know what the total is with shipping and I'll PayPal it right over. Thank you!