I decided to rebuild the motor in my 1973 Sedan DeVille. Issues were burning a quart of oil every 500 miles and unusual shaking of the engine that could not be resolved by rebuilding the ignition and fuel delivery infrastructure. Should've taken some compression readings but did not
I have the engine out of the car and stripped already:
I found it easier to remove the transmission from the engine and pull the engine straight up. Having access to a lift and an overhead crane to pull the engine makes this way too easy... ;D
First order of business were the exhaust manifold studs. Despite using heat, PB Blaster and Kroil, 11 out of the 16 studs broke. They broke like a twig. The shop charges $95 to extract the stud and re-tap. Nope.
Using Beydler's manibolt driller I was able to repair all 11 exhaust manifold holes. This is not magic. You will either go through a lot of drills or you have to have a drill sharpener. I had a drill sharpener and with a few extra drills, I was able to correct them. It will take time, no doubt about it.
What a beautiful kit, but the initial price made my jump, but as I always say, try making one yourself cheaper.
Glad it worked for you, and now you will be able to start up your own little business in repairing friends engines with the same problem.
Bruce. >:D
Interesting tool. What does it cost? I think after the first couple I would have been trying to grind the heads off and see if I could get the manifolds off. If you can get the manifolds off with a stud sticking out then its a 93.5834% chance with some heat you will be able to work them out.
US$499.99, plus postage is shown on the website, and that is just for one engine type/brand.
https://maniboltdriller.com/product/csb-209-g-cadillac-368-425-472-500-click-here-for-more-info/
Bruce. >:D
Yikes. Don't know what the market is like today but last time I needed a set of heads I paid less than that for them including shipping.
$500.00 isn't what it used to be.
And remember, you can't take it with you...
;)
Steve,Good to see all the sudden action around the Austin area. There have been about 5 new members or members with 69-74's. Contact Ken Karrer in Austin, the Director of the Central Texas region if you haven't already. Look forward to meeting you at a local event when we are able to restart them.
Greg Surfas
Thanks Greg, I will.
S.
So, my initial approach was to to strip the engine down to long block and have someone rebuild it. Then I realized that it would be the most expensive option and I would be out of the loop not knowing how well the job was done. Then I moved to stripping it down to short block and heads but then again there would be that element of not knowing how the block was put together. Finally I stripped the sucker down to bare block, heads, crankshaft, camshaft, rods, bolts and nuts and took the pieces to the machine shop with instructions. I will hopefully be putting it back together in about 3 weeks.
Look pretty clean. Hopefully a sign that you are not going to find anything that was badly worn or abused.
Do you already have engine building tools like cam bearing installer and decent size ring compressor? If not add it to the list along with one of those deluxe engine cleaning brush sets that have the long narrow brushes you will want to shove through every hole you can find to make sure they are clean.
Tips I can think of all learned the hard do it at least a second time way:
-get the new oil pump from one of the specialty vendors that checks them or read about the issues and check it yourself. I'm not sure if its still a problem with new production like it used to be but the issues went on for years so who knows if its fixed.
-weld nuts to the inside of the timing cover for the 1/4-20 water pump bolts. You can't see em from the outside so even if its going to be a show car its worth it to save possible damage and hassle in the future.
-keep the original hardware for the tins or if you do replace it make sure its the same type with the built in toothed flange. Those new hardware kits are tempting but will mean you will forever have leaks because the don't stay tight.
-get a bolt and washer for the crank. You can find them from large hardware suppliers but the specialty vendors have them and you will likely be getting other things from them so just add it to the order. Its nice to have it there to easily turn the engine over.
-another things the vendors should have is plug kits for things like if you are removing the smog pump. Little things like that can be a pain to track down otherwise and really slow the build.
Thank you TJ, those are very good tips. I do have the cam bearing remover/installer and used it. Pretty slick. My limited experience is with the overhead cam Jaguar 4.2 cylinder engine (straight six). Cam bearings on this one is easy.
Got a bolt for the crankshaft. I believe it is 9/16" - 18.
"keep the original hardware for the tins" - you lost me there... ???
I am definitely removing the smog pump. I believe there is only one vendor offering the replacement pulleys for a pricey $299. Is that the only option?
I need to look at the timing cover to see where exactly those bolts go to get a better visual...
S.
Love Mac's Pivot. Makes any engine remove/install a safe one man operation for either FWD or RWD vehicles. I will never R&R another engine even with transaxle without it.
Quote from: Dr. John T. Welch on January 18, 2021, 04:10:33 PM
Love Mac's Pivot. Makes any engine remove/install a safe one man operation for either FWD or RWD vehicles. I will never R&R another engine even with transaxle without it.
Oh yeah - that engine removal was a one man operation. I also used in the past to replace the engine mounts. Tools make life a little easier.
Original hardware for the tins meaning all the bolts to hold things like the oil pan and valve covers. There are several people that will sell you replacement hardware sets ranging from plain stuff to fancy stainless unique heads. The originals had a built in flange washer with little teeth that really do a good job. I bought a set of what were basically stainless regular hardware and they just don't stay tight even with loctite. The locktite may work if you did it on a spotless engine but after its been used didn't seem to help. Stock stuff didn't seem to have that problem.
There are 3 1/4-20 bolts for the water pump that only thread into the fairly thin material of the timing cover. Because they are much smaller than the rest even reasonably seasoned mechanics often over torque them and strip the threads out of the cover which then causes leaks. IF they are not damaged now just thread some extra bolts in then pin a nut down on the inside and weld the nut to the cover. The bolt keeps the nuts threads aligned with the old threads and holds it while welding.
There were a couple of years that didn't commonly have the smog pumps like 70 75 and 78 but you then have to mix in the single or dual groove and really needing to get it as a 3 piece set of the 2 pulleys and the timing indicator it can take some time and luck to get all the parts these days so $299 may not be that bad of a deal .
Quote from: TJ Hopland on January 18, 2021, 05:21:00 PM
Original hardware for the tins meaning all the bolts to hold things like the oil pan and valve covers. There are several people that will sell you replacement hardware sets ranging from plain stuff to fancy stainless unique heads. The originals had a built in flange washer with little teeth that really do a good job.
Quote from: TJ Hopland on January 18, 2021, 05:21:00 PM
There are 3 1/4-20 bolts for the water pump that only thread into the fairly thin material of the timing cover. Because they are much smaller than the rest even reasonably seasoned mechanics often over torque them and strip the threads out of the cover which then causes leaks. IF they are not damaged now just thread some extra bolts in then pin a nut down on the inside and weld the nut to the cover. The bolt keeps the nuts threads aligned with the old threads and holds it while welding.
Quote from: TJ Hopland on January 18, 2021, 05:21:00 PM
There were a couple of years that didn't commonly have the smog pumps like 70 75 and 78 but you then have to mix in the single or dual groove and really needing to get it as a 3 piece set of the 2 pulleys and the timing indicator it can take some time and luck to get all the parts these days so $299 may not be that bad of a deal .
Really good tips, thanks TJ.
I have all the tin but I typically replace it all. I source most bolt/nuts from McMaster Carr. Their selection is unbeatable. I will pay close attention now to what (if any) gets replaced.
G'day Steve,
Now, did you find out what was causing the excessive oil consumption? And how bad was the internals?
As for removing the AIR pump, that is easy, and as you are used to working with Jaguar stuff, then you can accomplish ANYTHING.
I removed the pumps on a couple of engines, and if you go to post No. 7 http://forums.cadillaclasalleclub.org/index.php?topic=144443.msg357185#msg357185 you will see how easy it is.
I have more pictures.
Bruce. >:D
Quote from: The Tassie Devil(le) on January 18, 2021, 05:50:28 PM
Now, did you find out what was causing the excessive oil consumption? And how bad was the internals?
Well, most of the valve seals were disintegrated - hardened with time, broken off and becoming one with oil. Pistons looked fine. The crankshaft journal bearings and rod bearings looked worn. The crankshaft main and rod journals looked worn as well - no heavy scoring. Dropped the bits to the machine shop today. Won't hear from them for a few days. Hoping that polish would be all that is needed but as soon as I find out i'll let you know. The original timing chain sprockets had some sort of a plastic covering which was gone long ago with only traces of it remaining....
Quote from: The Tassie Devil(le) on January 18, 2021, 05:50:28 PM
As for removing the AIR pump, that is easy, and as you are used to working with Jaguar stuff, then you can accomplish ANYTHING.
That is probably not far from the truth.... ;D
Quote from: The Tassie Devil(le) on January 18, 2021, 05:50:28 PM
I removed the pumps on a couple of engines, and if you go to post No. 7 http://forums.cadillaclasalleclub.org/index.php?topic=144443.msg357185#msg357185 you will see how easy it is.
I have more pictures.
I had a quick look but I need to study this in more detail... I am well versed to grinding and welding so when the time come I will hit you up for more pictures. That might be the way to go.
I do not recall if I mentioned this but I have traceability of this car to the original owner who bought the car in January of 1973 in Dallas, Texas. The car stayed within the family for 3 generations and has 65000 miles - a lot of them I suspect grinding broken pieces of valve seal and timing chain sprocket cover material. The engine had never been opened in the past.
Quote from: Steve S Heracleous on January 18, 2021, 06:21:23 PM
The original timing chain sprockets had some sort of a plastic covering which was gone long ago with only traces of it remaining....
Have a good look inside the oil pickup screen and see if there are any of those plastic pieces in there, hidden.
When I pulled mine down, it took an hour to get all; the pieces out, with banging, scraping and generally shaking the screen, but I got them all. Just don't put any holes in the screen, or you will be looking for a replacement.
Bruce. >:D
Hi Steve
You did you plan on using for the machine shop in Austin. 3 week turn around is very good. Hope to see you around Austin.
Thanks Wayne
Got a call from the machine shop today. It looks like the block will have to be honed 0.030" over which means new pistons. Any recommendations on piston manufacturer and vendors that cater to Cadillac internal engine parts?
Wow 30 is a lot for one of these. Not a lot as far as how thin the block will be but you usually don't see that from wear its usually because it sat at some point and had some rust pitting issues from moisture.
If it was me I think I would be looking at cadco. cad500parts.com. Proabbly the Silvolite or RC cast pistons. I have not bought from them before but they seem to have that small operation vibe and have been around a long time. Used to buy from MTS but they just don't seem to be what they used to since the main guy passed several years ago. Just now looked to see what their current name and site was because its been changing every time I look and I'm not even sure anymore what it is. Cadco has been around for at least 25 years and as far as I know is run by the same people.
Steve,
You have a choice here. You can either replace the pistons with "soap dish" low compression pistons or go to the "1970" version with a 10:1 compression ratio. In either case I would work through your machine shop since they are the ones that will be responsible if you purchase the pistons through them. Egge Machine in Terrel Texas makes both pistons so you might point the machine shop in their direction.
Regarding 0.030 over being excessive, It seems that if properly maintained and oil/filters changed the cylinder wear is an absolute minimum. I had over 500,000 miles on one motor and not enough wear to catch your fingernail on the ridge. But, if neglected the motors can wear excessively. Hence the first oversize commonly listed is 0.020 over, and with any minute scratches in the bore, .030 is a safe choice.
Greg Surfas
Got the block, crank and heads from the machine shop a few days ago. I decided to stay stock and got original pistons (8.5:1, .030 over) from cad500parts.com. Got the rings, main bearings and rod bearings (.010).
First order of business will be to mike everything just to make sure everything is ok (main, rod clearances). In the mean time, I will have to put an order in for a gasket set, oil pump etc. Camshaft, lifters, pushrods seem to be ok and planning to re-use them. Once I get to them, I will check the cam/lifters using a degree wheel to make sure parts are not worn.
I want to replace the cylinder head bolts since they are the original ones - the ones that go through the exhaust ports are cruddy anywhere. I am not able to find a bolt kit - instead, I can get a stud kit. I'm kinda liking the bolts since it makes head install / removal a little easier. Any sources out there for a cylinder bolt kit?
Hi Steve
What machine shop did you use here in Austin?
Thanks Wayne
Wayne,
I actually used Duffin Engine Service in San Antonio. A drive from where I live but what the heck. They gave me a turnaround time of 3 weeks. Including the snowcalypse we had in Texas it ended up being 5 weeks.
S.
Cadco should have the bolts and oil pump. I would buy all I could from a source like them because a company that just sells parts for one family of oddball engine has more incentive to try and get the best quality stuff than someone that just sells auto parts.
I too would re use things if they looked good. Ya never know what the quality would be like with replacement stuff but you know what you have lasted so far. Its a one thing leads to another and you end up replacing a lot of stuff and any of the new parts could be the weak link.
Hi Steve
That is a great turnaround time. I will have to keep them in mind for my next machine work.
Thanks Wayne
Duffins is a great shop. I would never think of having anyone else doing my work here in San Antonio.
Greg Surfas
Since you are ordering from CadCO they have a high flow oil pump that helps maintain better flow when letting off of the gas or when sitting at idle.
After about a year of hiatus, I am back on board in putting the 1973, 472 CID Cadillac engine back together. Measurements on the cylinder bores checked out fine and then proceeded to check the crankshaft main bearing clearances. I am doing the measurements the "accurate" way by utilizing a micrometer and a bore gauge to measure each main journal clearance.
The factory manual calls for a clearance on the main bearings of 0.0005" to 0.0028". All measurements that I took on all 5 main journals range from 0.0045" to 0.0055" (bore gauge accuracy to 0.0005"). Doing some research on the net the recommendation from engine builders is to use 0.001" of clearance per inch of the journal diameter with a max clearance of x 1.5 the measurement obtained. So, on this crankshaft, the main journal diameter is 3.25" so a proper clearance would be 3.25 x 0.001 = 0.0033 (rounding up). Max clearance would be 0.00325 x 1.5 = 0.0049". Wide range of clearances.
Not sure there is much to do here other than use 20W-50 grade oil on this engine and ensure that I have a high output/flow oil pump and call it a day for this topic.
Any thoughts? I will next measure the crankshaft rod journals for clearances and will report back.
I had some pictures to share but the web site does accept them - I get a 500 HTTP error code.
I'm late to this post, but on the exhaust manifold bolts, with engine out of car you can grind the stuck bolt heads off and then remove the exhaust manifold. Now a stud extractor should work OK because you can get the heat, chemicals and etc close to the where the threads penetrate the head. If that does not work you can buy the tool and go to town, and you are no worse off than before. But the upside is saving yourself the $500 tool cost.
BTW I'm with you; supervise and do as much of it yourself as you can to avoid a potential mess up.
The intake manifold requires real good seals at the corners. If you just RTV around the 8 intakes it will leak and idle rough, with timing all over the place.
Measured the rod bearing clearances using a micrometer and bore gauge. They all measured between 0.0015" and 0.0025". The manual calls for 0.0005" - 0.0028". So, I am happy with these measurements.
Steve,
Regarding the head bolts, for a stock engine bolts are adequate and used bolts can be cleaned up and "thread chased" then re-used. Again, if you haven't yet gotten one, a stock oil pump will provide all the oiling you motor needs. If the oil pump housing is not scored, you can get replacement gear sets to bring it back to "new" conditions. If you gave Russel or Donald at Duffins the pistons before they bored the block, they built in the proper clearances for you, and again, for a stock motor the best intake gasketing solution is the "turkey roasting pan" and the rubber end seals, being sure to apply something like "the right stuff" at the corners. I personally get real liberal with the sealer and ensure the ends of the intake are completely sealed to the block's "china rails".
Did you have ARP bolts installed and the rods resized?
Greg Surfas
Quote from: "Cadillac Kid" Greg Surfas 15364 on January 17, 2022, 02:46:13 PM
If you gave Russel or Donald at Duffins the pistons before they bored the block, they built in the proper clearances for you
Yes I did. I am assuming the clearances are good for this motor. :P
Quote from: "Cadillac Kid" Greg Surfas 15364 on January 17, 2022, 02:46:13 PM
Did you have ARP bolts installed and the rods resized?
Greg,
Yes, the rods were resized and the ARP bolts installed. I am in the process of checking ring gap now before installing them on the pistons. After ring gaping, I will check the block threads for the cylinder head bolts (chase and clean), followed by installing the camshaft and then the crank. That's the plan for the next couple of days.
Sounds like you have a handle on it.
Greg Surfas