Need help finding 1992 Fleetwood body molding

[Crimtide]

Looked online as far as I can.. after searching a myriad of websites and going through what seems like hundreds of pages of Google search results.. I can't find a single lead.

I am looking for the body moldings for a 1992 Fleetwood as mine have deteriorated a bit. 

[Barry M Wheeler #2189]

FWD?

[Eric DeVirgilis CLC# 8621]

FWD Fleetwood Coupe.

Door molding will be compatible with 91-93 Coupe deVille. Will have to swap the chrome insert strip with "Fleetwood" Lettering. Right front fender molding should the the same for 2 & 4 door 91-93 DeVille as well.

Door molding won't be easy to find being a 2 door. Will have to be patient.

Keep checking eBay. Use search terms "1991 Cadillac Molding" and hit the "Used" button on the left of the page. Repeat same search for 1992 and 1993. Also use search term "1991 Cadillac Cladding" and repeat for 1992 & 1993 - again, check the "Used" box.

Save all 6 of these searches so you'll get email notifications as items are listed fitting the criteria.

[Barry M Wheeler #2189]

This is a listing I found of parts yards having DeVille coupes for the years you need. When you call, do not expect them to send someone out "right away" to see if they still have the parts. These are "nuisance" parts and since they will have to pack them, they will attend to it at their convenience. Be polite and patient and if the price they quote seems too high, thank them and tell them you will get back to them. (Tell them it's for your wife's car and you have to see if she wants to pay that much.) And then try the next one on the list. As Eric said, you will have to take your "Fleetwood" stainless from your old parts and install them in the "DeVille" ones. Postage will be high as they will be an oversize package. Thank them for looking and be sure to tell them the stock # of the car. They may, or may not still have it in stock. Good luck.

[Crimtide]

FWD?

Yes FWD

[Crimtide]

FWD Fleetwood Coupe.

Door molding will be compatible with 91-93 Coupe deVille. Will have to swap the chrome insert strip with "Fleetwood" Lettering. Right front fender molding should the the same for 2 & 4 door 91-93 DeVille as well.

Door molding won't be easy to find being a 2 door. Will have to be patient.

Keep checking eBay. Use search terms "1991 Cadillac Molding" and hit the "Used" button on the left of the page. Repeat same search for 1992 and 1993. Also use search term "1991 Cadillac Cladding" and repeat for 1992 & 1993 - again, check the "Used" box.

Save all 6 of these searches so you'll get email notifications as items are listed fitting the criteria.

Thanks for the info, will do!

[Crimtide]

This is a listing I found of parts yards having DeVille coupes for the years you need. When you call, do not expect them to send someone out "right away" to see if they still have the parts. These are "nuisance" parts and since they will have to pack them, they will attend to it at their convenience. Be polite and patient and if the price they quote seems too high, thank them and tell them you will get back to them. (Tell them it's for your wife's car and you have to see if she wants to pay that much.) And then try the next one on the list. As Eric said, you will have to take your "Fleetwood" stainless from your old parts and install them in the "DeVille" ones. Postage will be high as they will be an oversize package. Thank them for looking and be sure to tell them the stock # of the car. They may, or may not still have it in stock. Good luck.

Thanks again Barry.  Will jump on that.

[Crimtide]

Let me ask you all this, is the whole section between the red lines one piece, minus the chrome insert that says "Fleetwood"?  Or is it just the section between the blue lines?

[Eric DeVirgilis CLC# 8621]

One piece. (Aside of the front fender section).

[V63]

These models are being crushed pretty readily...adding the rarity of the 2 door version..I think I would look into repairing what you have. epoxy or polyester filler, sanding and refinishing.