News:

Please note that, while reinstating users, I have noticed that a significant majority have not yet entered a Security (Secret) Question & Answer in their forum profile. This is necessary for a self-service (quick) password reset, if needed in the future. Please add the Q&A in your profile as soon as possible

Main Menu

1959-60 heater duct/boot

Started by Steve, January 13, 2005, 02:36:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Steve

January 13, 2005, 02:36:25 PM
Hello All,
Anybody out there know of a supplier for the rubber boot/duct that goes from the heater blower to the heater box on the firewall for non-air cars? Im looking for something close to the original, not a hard plastic one.
Thanks to all that reply, Steve

Bob

#1
January 13, 2005, 06:15:15 PM
USA Auto parts

Bruce Reynolds # 18992

#2
January 13, 2005, 08:10:19 PM
Gday Steve,

What I used on mine is a cut up inner tube and wrapped that around.   Put the overlapping join to the back after you have joined it with some contact cement.

Worked a treat.

And, if the inner tube has a couple of mends in it, all the better.   Hate cutting up a new tube.   Plus, you are left with pieces of rubber that can be used elswear in the workshop.

Bruce,
The Tassie Devil(le),
60 CDV
Print
Go Up Pages1
User actions