News:

The changes to make the forums only allow posting by CLC members have been completed. If you are a CLC member and are unable to post, please send the forum administrator (admin@forums.cadillaclasalle.club) your CLC number, forum username and the email in your forum profile for reinstatement to full posting and messaging privileges.

Main Menu

In need of brake line brackets(see pics)1956 Caddy 6219X

Started by RayRay, January 08, 2019, 10:08:17 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

RayRay

I need driver and passenger side brake line brackets. A good pic of routing would be nice too.  :) thanks

35-709

In your second picture, the red wire that runs inside that clamp --- please wrap it with something, or slip a piece of small hose over it to protect it from chafing, or find somewhere else to hold it in place.  What I see is really not a good idea.
There is a fine line between "Hobby" and "Mental Illness".  Dave Barry.   I walk that line.
1935 Cadillac Sedan resto-mod "Big Red"
1973 Cadillac Caribou - now back home as of 9/2024
1950 Jaguar Mark V Saloon resto-mod - Sold
1942 Cadillac 6269 - Sold
1968 Pontiac Bonneville Convertible - Sold
1950 Packard 2dr. Club Sedan
1935 Glenn Pray - Auburn Boattail Speedster, Gen. 2

M. Bankes

Hi,
I believe I have them, I can take them off the car tomorrow if you'd like, $ 25 for the pair
Let me know, you can e-mail me at faded.fins@yahoo.ca
Michael

RayRay

Quote from: 35-709 on January 08, 2019, 01:52:53 PM
In your second picture, the red wire that runs inside that clamp --- please wrap it with something, or slip a piece of small hose over it to protect it from chafing, or find somewhere else to hold it in place.  What I see is really not a good idea.

Yeah I know, I acquired this project in the state that it's in and there's quite a few things that need attention. I've already found a handful of issues put together incorrectly. They pretty much just installed the drivetrain ran all the brake and fuel lines and I got it right after they put the body on it so the only thing I've gotten to so far is the wiring, I installed the dash and now I'm working on going over everything with a fine tooth comb and noticing brackets and linkages missing.
   Thanks for the insight though!

RayRay

Quote from: M. Bankes on January 08, 2019, 07:21:34 PM
Hi,
I believe I have them, I can take them off the car tomorrow if you'd like, $ 25 for the pair
Let me know, you can e-mail me at faded.fins@yahoo.ca
Michael

I would love to get them, any way you can take a picture of both sides before you remove them and send that as well? Im trying to get a reference for line routing and a visual of the engine bay overall. Let me know what the total is with shipping and I'll PayPal it right over. Thank you!